Home Blog Page 112

Q&A: Massad Ayoob On Self-Defense In Today’s America

0

Mas-Ayoob-Warning-Shots-Lead

Massad Ayoob gives his perspective on Kenosha, Wisc., new gun ownership, training in the time of pandemic and more.

Few names in the realm of concealed carry and self-defense are as recognized as Massad Ayoob. Plain-spoken and extremely thoughtful, the renowned firearms author, law-enforcement veteran, competitive shooter, firearms instructor and all-around self-defense guru has demystified the finer aspects of going armed for going on two generations of Americans. Given America’s turbulent times the past year, where self-defense has taken centerstage and new gun owners have multiplied, we thought there was no better brain to pick. Luckily, Mr. Ayoob had time to spare from his busy schedule and broke down his perspective on Kenosha, Wisc., expanding gun ownership, training in the era of pandemic and much more. As always with the master, it was enlightening.

Gun Digest: Let’s jump right in. There’s been a slew of events that have put armed citizens in the spotlight, most recently Kenosha, Wisc. What’s your expert opinion on what transpired with Kyle Rittenhouse, at least what we’ve seen on the video?

Massad Ayoob: First, on all these things, we don’t have all the information yet. It’s premature to pretend we’re judge and jury ready to deliver a verdict.

Looking at what’s been available as of today, Sept. 7, 2020, basically it looks like self-defense. You see Rittenhouse being chased by a guy, you see that guy throw an object, which in some light looks as if it’s burning. I don’t know if the kid mistook that for a Molotov cocktail or not, but judging by what you see on some of the videos that’s certainly a possibility. Shots are fired immediately beforehand somewhere, and there’s one video that looks like one of the protesters is pointing a gun in the air and firing. That might have led Rittenhouse to believe he was under fire. For all I know, the kid was under fire, because we don’t know where all those shots came from. It’s at that point Rittenhouse fires at the first man and inflicts the mortal wound. Thereafter, it appears the others rioters are closing in on him, so Rittenhouse runs.

The next set of videos pick up, Rittenhouse is being chased, trips and falls. One guy does the flying kick at him; you can’t tell if he kicks Rittenhouse in the head or not, but it looks like he was trying to kick him in the head. The other, who gets shot in the torso and gets killed, smashes him with a skateboard. As I said on Lars Larson's show, this is like a magnum version of an ax handle. You have all the density of the wood as the edge strikes.

Finally, the third man who got shot—if you analyze it and freeze-frame it—appears to be reaching for the gun, as to take it and turn it on Rittenhouse. And he is pointing his own, what appears to be a “Baby” Glock, pistol at young Rittenhouse’s head at the moment the teen shoots and mangles the man’s arm. When that guy turns away Rittenhouse ceases fire.

At no time does Rittenhouse appear to fire wildly. One guy is rushing at him, he points the gun in his general direction, the guy backs off and the kid doesn’t shoot.

Gun Digest: Does the fact he came from out-of-state, injecting himself in a tense situation, play against him?

Massad Ayoob: I think he’s defensible, according to what his defense team has put out so far.

Rittenhouse earlier that day was cleaning up graffiti. He had gone to Kenosha in what about a 20-mile drive from his home to, again, do clean up and did not bring an AR-15. The picture of him on Facebook holding an AR-15 is a different gun and different sight than the one he used in the incident, clearly.

They’re saying, when he got there to help out—he had brought his medkit—he was interviewed and said that same. He described himself as an EMT, I think. He had helped one other person, at least, already that night. He was told the danger has escalated, shots are being fired and all that, and he is offered an AR-15, which he takes.

Now, the fine points of the Wisconsin law on a 17-year-old from out of state possessing an AR-15, it’s kind of seesawing. There’s a lot of what a layman would call legal “mumbo jumbo” going on. Some of it a little self-contradictory. What you have in any state, in those sorts of circumstances, is what is called in common law the “doctrine of competing harms.” It is known in many states as the “doctrine of necessity” and in a few states the “doctrine of two evils.” It simply says you’re allowed to break the law in the rare circumstance where following the law is likely to cause more human injury than following the law.

For example, say you find yourself someplace where technically it isn’t legal to possess a gun, but there is a life-threatening emergency. Someone with no ill intent hands a gun to you for protective purposes and you have no ill intent. Then you’re attacked and you use it defensively. The law says you should be held harmless.

So, coming in from another state, I think that’s the least of the kid’s worries.

Gun Digest: Switching gears, rioters are destroying property, attacking commuters and random individuals. At the same time, many powerful players—DAs in particular—seem intent in painting citizens who defend themselves in the worst possible light…

Massad Ayoob: Those seem to be the same ones letting off the rioters by saying, “Oh, they’re only protesters.”

Gun Digest: It does seem that way, doesn’t it?

Massad Ayoob: When they say it was a “mostly peaceful protest” it reminds me of that meme that says the surprise Japanese flyover at Pearl Harbor was “mostly peaceful.”

Gun Digest: This seems like a very dangerous situation. What advice do you have for armed citizens to keep themselves physically and legally safe in this environment?

Massad Ayoob: First is to stay the hell away from the riots. No matter what your political feeling may be, don’t go looking for trouble.

Rittenhouse, by all accounts, we’ve seen at this time had the best of intentions and still finds himself in jail facing a double murder charge. And he’s being excoriated as a vigilante and a right-wing nut. The bottom line is, avoid it if you can.

If the trouble comes to you, deal with it. If you go to the scene knowing something like this might happen, it’s really easy for the other side to falsely paint you as a participant in mutual combat. Since the Middle Ages, it’s been understood that in mutual combat both parties are equally liable for the results. Whoever ends up horizontal goes to the hospital or morgue; whoever ends up vertical goes to jail. And even though you are on the right side of the argument, the right side of the debate, the right side of the conflict, you’re opening yourself and your family up for a very expensive, very traumatic, very long-lasting nightmare.


Get Your Copies Of Massad Ayoob's Books:

New! Gun Digest Book of Combat Handgunnery
—Deadly Force
—Gun Digest Book of Concealed Carry
—Straight Talk on Armed Defense
—Combat Shooting with Massad Ayoob


Gun Digest: As I’m sure you’re aware, there’s been an onslaught of gun purchases since the beginning of the year, many of them first-time gun owners. As a firearms instructor, I’d imagine your first bit of advice to these folks would be get trained.

Massad Ayoob: Get some knowledge. I would say get some training, except in so many states now firearms training is virtually shut down by the pandemic rules.

Gun Digest: Given this, what should new gun owners do to gain fundamental and practical knowledge?

Massad Ayoob: First, there is gold and there is crap on the internet. Some of the gold is the Polite Society Podcast. They’ve put together a series of experts giving 10-minute lessons for absolute newbies. Here’s how you work a semi-automatic pistol. Here’s how you work a double-action revolver. Here are the safety elements. Things of that nature.

Secondly, there is quality reading. The Gun Digest series alone has tons of books on how to get started with defensive shooting, in terms of techniques, how to safely draw from a holster, how to legally carry, how to carry discreetly.

Gun Digest: Hand in hand with knowledge, how should new gun owners train if, say, their local range is shut down?

Massad Ayoob: First, they need to focus on basic firearms safety. To that, if you can find a large enough space, you can learn the basics of handling a firearm with an Airsoft. You won’t be accustoming yourself to the sound of the gun firing and obviously the recoil. But basic manipulation, stances, the safety protocols can be learned hands-on in that environment.

Gun Digest: How about those who can still get live training, what do they need to look for in a quality instructor and program?

Massad Ayoob: Reputation. If a school says it has the finest staff, but they don’t tell you who the staff is, I would see that as a red flag. If the staff is named, do a Google search and see what comes up on them. If they’re a regular firearms business, do a Yelp search—this will give you a lot of customer feedback. Some of it will be crap competitors put in, but generally, you’ll get what the tenor of the class is and that you have an instructor that is safe and knows their stuff. An instructor that isn’t there to tell you how wonderful he is, but to tell you how skilled and safe you can be.

Gun Digest: Beyond the basics, what other instruction should armed citizens seek out?

Massad Ayoob: You’re looking for the “When” (you can shot) and you’re looking for the “How” (to shoot).

On the when side, the two primary schools are Andrew Branca’s Law of Self Defense class, which can be had online. I would recommend if he’s doing one in your state to take one there because he’ll do those with an emphasis on state-specific laws. The other is my school, the Massad Ayoob Group. The shortest class we offer is two 10-hour days, usually done over a weekend. That is all classroom and video on legal elements, tactical elements, the psychological elements of preparing beforehand to face a deadly-force encounter.

On the how to shoot side, there are many major schools worth investigating: Gunsite in Arizona, they also have off-campus training; Clint Smith’s school Thunder Ranch in Oregon; in the Pacific Northwest, the Firearms Academy of Seattle; Firearms Academy of Wisconsin … really there’s a lot of good places. One place to research them is Pistol-Forum.com, they have a section on upcoming training in various areas. GunHub.com would be another good resource. Also, go to wherever you bought the gun and the gun shop owner will know who the instructors are. The gun shop itself may offer instruction.

There are also thousands of NRA instructors around the county, a call to the National Rifle Association will help you find them. Also consider, for basic firearms safety, hunter safety classes run by every state’s fish and game. That you can find right in your backyard.

Gun Digest: Firearm, holster, belt, CCW permit, training … what else does an armed citizen need?

Massad Ayoob: Basically, the realization it’s a holistic lifestyle. It’s not just about the gun. The gun is not a talisman that wards off evil. It’s simply the last-ditch tool in a life-threatening emergency. I teach my student to treat the gun as an emergency safety tool, similar to a fire extinguisher.

Schlender-Ayoob

Gun Digest: Is there anything else new gun owners need to keep in mind?

Massad Ayoob: Just an emphasis on safety. For the new gun owner, there are going to be some in the household that will act as if they’ve gone to the pet store and bought a venomous snake. Make sure the gun is secured from unauthorized hands, the hands of little kids, the hands of your drunk brother-in-law or from a burglar who breaks into the house.

Some think that carrying a gun in the home is the ultimate paranoia, actually, it’s probably the ultimate safety. When the gun is on your physical person, your hand can be on it in a second no matter where you are when you hear the door being kicked in or alarm going off. Simultaneously, it is secure from unauthorized hands. A whole lot of people miss that.

Finally, be aware of where it’s legal and isn’t legal to carry. For example, the state of New Hampshire, you can go into a bar armed, have four drinks in an hour, walk out and as long as you don’t get behind the wheel you haven’t committed a crime. In the state of Florida, if you are waiting in a restaurant and walk into its bar armed for a Coke, you have committed a crime. But in that same establishment, you have four drinks with your meal in the restaurant section, you’re perfectly legal. We live in a nation where, ironically, the deadly force laws are remarkably uniform. The possession laws are a 50-piece patchwork, where no two states are absolutely identical. It's critical to know these laws and to stay up with them.

Gun Digest: Thank you for your time Massad.

Massad Ayoob: Thank you.

Learn From The Master–Massad Ayoob:


Springfield’s Carry-Friendly XD-M Elite Compact

0
XD-M Elite Compact sized-right for concealed carry
Sized-right for concealed carry.

Hefty capacity, excellent ergonomics and trigger that breaks like winter ice … meet Springfield's XD-M Elite Compact.

How The XD-M Elite Compact Enhance Carry:

  • 14-round flush-fit standard magazines
  • 3.8-inch match-grade barrel
  • Flat-faced META trigger
  • Flared, removable magwell

Striking a chord with its shootablity and ergonomics, Springfield Armory’s XD-M line has often been heralded as the best in the gunmaker’s catalog. It seemed the larger-framed pistols—especially in 10mm—excelled at just about everything … almost everything. The hitch in the giddyap was concealed carry, proving too much gun for most to keep under wraps—until now.

Catering to the insatiable demand for easy-to-carry defensive handguns, Springfield Armory introduced the trimmed down XD-M Elite Compact. Fifth in the series, the petite 9mm packs plenty into a small package, including an excellent price point. The MSRP on the striker-fired is $559, which should equate to slightly north of $500 once it hits gun store shelves. Easy on the pocketbook could equate to hard to obtain, however, given the clip handguns—even spendy ones—have flown off the shelves in recent months.

Based on the XD-M line, the Elite version of the pistols offers some welcome and practical upgrades. Among the more notable is what Springfield calls its Match Enhanced Trigger Assembly (META). Flat-faced—old XD-M shoe was curved—the trigger promotes a more linear path, while at the same tick reducing the perceived weight required to trip it. It breaks at a very crisp 5-pounds, without a lick of spongy feel, and has an extremely terse and tactile reset. The latter aspect, once a shooter is familiar with it, makes the gun particularly quick shot to shot.  In addition to this, the XD-M Elite Compact includes large chevron cocking serrations fore and aft, an ambidextrous slide stop, match-grade barrel and a removable flared magwell.

XD-M Elite Compact flared magwell to up the pace of reloads.
Flared magwell to up the pace of reloads.

As to the XD-M Elite Compact’s tale of the tape, the pistol boasts a 3.8-inch barrel, is 6.75-inches in overall length, 4.58-inches in height and weighs in at a very manageable 27 ounces. Before its release, to go that small shooters had to turn to the original XD subcompact or XD-S model. But the new pistol has a major leg up on its sibling in capacity. The double-stack feeds off a 14-round flush-fit magazine with the option for 20-round extended-capacity mags. However, leveling up to large mags means forgoing the magwell. Can’t have everything.

As to the XD-M Elite Compact’s sighting system, it’s similar to much of Springfield’s new additions, which veer away from traditional three-dot sight. Instead, the gunmaker opted for what it calls a U-notch, which is pretty much like it sounds—a white outlined u-shaped rear sight. Up front, the pistol has a fiber-optic pipe for a bright, eye-catching dot. Simply put the dot in the basket to get the gun on target.

Overall the XD-M Elite Compact offers a tidy and very shootable package that arms its user with enough firepower to hand nearly any situation.

XD-M Elite Compact Specs:
Caliber: 9mm
Color: Black
Barrel: 3.8″ Hammer Forged Steel, Melonite® Finish, 1:10
Slide: Forged Steel, Melonite® Finish
Frame: Black Polymer
Sights: Fiber Optic Front, Tactical Rack U-Dot™ Rear
Recoil System: One Piece w/ Full Length Guide Rod
Grip Width: 1.2″
Magazines: (2) 14-Round
Weight: 27 oz
Length: 6.75″
Height: 4.58″
MSRP: $559

For more information on the XD-M Elite Compact, please visit springfield-armory.com.


More On Springfield Armory:

Ruger Wrangler Revolver Review: Back To Basics

0
Ruger’s Wrangler entry-level revolver is a robust and accurate handgun for those on a budget. Newer pistoleros should consider using the savings to buy ammo for practice.
Ruger’s Wrangler entry-level revolver is a robust and accurate handgun for those on a budget. Newer pistoleros should consider using the savings to buy ammo for practice.

Cutting out the usual price factor of a single-action rimfire, the Ruger Wrangler revolver is an everyday tool for outdoorsmen.

Gun-Digest-2021
This article is an excerpt from Gun Digest 2021, 75th Edition available now at GunDigestStore.com.

I’ve known a few cowboys in my time. These guys are not the pressed shirt and starched jeans over ostrich-skin boots types. No sir, I am referring to the man who wears a wrinkled chambray shirt, torn jeans that have patches on top of older patches with run-over boots and a sweat-stained hat. His hands have what seems to be a half-inch of rough calluses, and after you shake hands you wonder if he could file metal with them bare. He spends his days outdoors tending cows. His nights are an extension of his days. If he’s lucky, he gets perhaps four or five hours under a leaky cabin roof to eat and sleep. Many nights are spent outside, regardless of the weather. And, if given an option, he’d certainly choose this life over steering a desk in a corner office at the corner of Wall and Broad streets.

His tools are as roughshod as he is. He rides a saddle with fenders so badly scratched from barbwire that it looks like hieroglyphics. The pistol he carries, at first look, probably dates back to the 19th century. Metal parts are gray, often with rust pits, and the stocks are smooth from wear, perhaps with a few chips. Cowboys like this, with rare exceptions, don’t give a damn what a gun looks like. All they care is that it goes bang when they want it to and puts a hole in something. And, oh yeah, it doesn’t cost them an arm and a leg to buy or shoot.

Ruger’s Wrangler .22 LR, introduced in the spring of 2019, is made for these cowboys or anyone else interested in a rugged, dependable, entry-level sixgun. It provides the latest in single-action revolver technology without frills and dressing.

The Wrangler’s fixed sights have been a sturdy and accurate design for more than 140 years. Windage was spot-on for the shooting tests; elevation was dependent on the particular load.
The Wrangler’s fixed sights have been a sturdy and accurate design for more than 140 years. Windage was spot-on for the shooting tests; elevation was dependent on the particular load.

Bill Ruger kept alive what was thought to be a diminishing market for single-action revolvers when he introduced the Single-Six in 1953. Ruger was a brilliant engineer and designer, as well as being something of a renaissance man in terms of style. The Single-Six mimicked the lines of Colt’s famous Single Action Army, but it was scaled to rimfire calibers. Ruger used coil springs instead of the flat springs of the Colt. Coil springs are far easier to make in quantity while maintaining quality and consistency. As most know now, Ruger pioneered the use of precision investment castings in the production of his guns. These qualities allowed Ruger to offer a well-made, accurate and rugged revolver at a competitive price point. The first Single-Sixes carried an MSRP of just $57 and change. Today, however, a new Single-Six carries an MSRP of $629. While it might be worth every penny, it’s still a tough bite for a beginning pistolero or anyone on a tight budget.

The Wrangler steps up with an MSRP of $249, or about 40 percent the cost of a Single-Six. No, there’s no spare cylinder in .22 WMR. To paraphrase Henry Ford, you can get any barrel length you want as long as it’s 4-5/8 inches. The metal parts are not polished, they’re Cerakoted, but you do get a choice of finish: black, silver or burnt bronze. Its cylinder is finished in a black oxide. The only steel in the Wrangler is the barrel, cylinder and lockwork components. Those lockwork components, by the way, are metal injected molded. The frame and grip frame are investment-cast aluminum. Sights are fixed: a blade up front and a groove in the topstrap for a rear. Grips are composite, but the grip frame dimensions follow the XR-3, therefore aftermarket shoes should fit.

Arguably the best feature on this revolver, or any newer Ruger single action, is what Ruger calls its loading gate interlock. With the hammer down, open the loading gate. This lowers the cylinder-locking bolt and allows the cylinder to spin freely in either direction (very handy for topping off a cylinder when all the rounds have not been expended). In this condition, the hammer is prevented from moving. Conversely, if the hammer is cocked, the loading gate cannot be opened. Along with Ruger’s transfer bar that prevents the hammer from touching the inertia-driven firing pin unless the trigger is fully pulled, these are among the safest of all single-action revolvers. You can carry it safely with all six rounds in the cylinder, and the only way it can discharge is to bring the hammer to full cock and press (and hold) the trigger completely.

With the hammer cocked, the transfer bar is raised into position to allow it to impact the floating firing pin. When the hammer is down, the transfer bar is lowered out of the way, and the hammer’s nose prevents it from touching the firing pin.
With the hammer cocked, the transfer bar is raised into position to allow it to impact the floating firing pin. When the hammer is down, the transfer bar is lowered out of the way, and the hammer’s nose prevents it from touching the firing pin.

The only issue I had was an occasional tie up of the lockwork when cocking the hammer. This was quickly solved with a few drops of gun oil in the cutouts on the side of the hammer and the loading gate pivot. It also helps to put a couple of drops of oil on the cylinder base pin. We have come far in firearms design, but the damn things still need lubrication to function.

Something that gave me pause, but is probably not of any consequence in the grand scheme of things, is that the muzzle is not crowned. Muzzle crowns were done to protect the rifling at the muzzle and preserve accuracy. While the Wrangler certainly is no target pistol, it still has quite serviceable accuracy. As the table shows, I was able to wrangle 2-1/2 inches as an average at 25 yards. This kind of revolver is more likely to pot a rabbit at 10 to 15 yards or worry a tin can at the same distance.

Interestingly, the barrel-cylinder gap in my sample was a rather tight .0015-inch. I suspect that is to protect the aluminum frame from flame cutting, but if you are shooting some of the dirtier .22 LR ammo, plan on spraying that area after every 100 rounds or so, to wash away the gunk. I didn’t have a problem with it, but someone who shoots this revolver a lot might find the gunk makes it a little tougher to cock and shoot.

Ruger Wrangler Specs

No, Ruger’s Wrangler is not a fine revolver with all the little tweaks to make it top of the line. It’s a rough-and-tumble gun designed to punch holes in stuff reliably. In that regard, it’s a winner.

Ruger Wrangler Specs:
Type: Single-action revolver
Caliber: .22 LR
Barrel Length: 4-5/8 inches
Capacity: Six rounds
Trigger: 5 pounds, 8 ounces
Rifling: 1:14 RH
Sights: Topstrap groove rear; fixed-blade front
Safety: Transfer bar and loading gate interlock
Grips: Black composite
Overall Length: 10.25 inches
Weight: 30 ounces
Metal Finish: Cerakote; black oxide on cylinder
MSRP: $249

For more information on the Ruger Wrangler, please visit ruger.com.

Editor's Note: This article is an excerpt from Gun Digest 2021, 75th Edition available now at GunDigestStore.com.

Get More Ruger Info:

Evolution Of The American Sniper Rifle

2
Among the most customizable sniper rifles to come down the pike, the M2010 Enhanced Sniper Rifle fits any shooter behind its business end. The chassis is also a .300 Winchester Magnum, vastly extending the sniper’s reach.
Among the most customizable sniper rifles to come down the pike, the M2010 Enhanced Sniper Rifle fits any shooter behind its business end. The chassis is also a .300 Winchester Magnum, vastly extending the sniper’s reach.

The American sniper rifle has taken many forms, but its objective has remained the same—one shot, one kill.

Select Primary American Sniper Rifles Used Throughout History:

  • American Long Rifle (American Revolution)
  • Sharps Rifle (Civil War)
  • Whitworth Rifle (Civil War)
  • M1903A1 (World War I)
  • M1903A4 (World War II)
  • M1941 (World War II)
  • M1C (Korean War)
  • Winchester Model 70 (Vietnam War)
  • M21 (Vietnam War)
  • M40 (Vietnam War)
  • M24 (Modernday)
  • M2010 (Modernday)
  • M82 (Modernday)

The sniper rifle, engineered expressly for long-range shooting, singularly captures the American imagination. It’s little wonder why.

Aside from their incredible ballistic feats, the men who wielded these specialized tools exemplified the best traits of our soldiers. Be it the U.S. Marine Corps’ Carlos Hathcock, Navy SEAL Chris Kyle or any of the other countless long-range warriors, the American sniper proves diligent, courageous, skilled—and, above all, deadly.

That last point is especially true. Whereas infantry takes hundreds of thousands of rounds to record a kill, the sniper’s requirements have remained consistently low: an efficient 1.3 rounds at last count. That’s a testament to their training and tools. Neither one is a recent occurrence.

The Deerslayer Goes to War

Perhaps no single muzzleloader stirs the American imagination more than the American Long Rifle. Just the mention of what’s better known now as the “Kentucky Rifle” conjures up images of Colonists picking off Red Coats at distance.

The American Long Rifle still stirs the American imagination. Deadly past 200 yards, the rifle played only a limited role in the Revolutionary War, given how long it took to load and its incompatibility with a bayonet. (Photo: Rock Island Auction Company)
The American Long Rifle still stirs the American imagination. Deadly past 200 yards, the rifle played only a limited role in the Revolutionary War, given how long it took to load and its incompatibility with a bayonet. (Photo: Rock Island Auction Company)

The accurate flintlock did play that role in America’s struggle for independence, perhaps most notably in the battles of Kings Mountain and Saratoga. The war even saw the first formalization of an American sniper unit (of sorts) by Daniel Morgan, aptly called “Morgan’s Riflemen.” But overall, its part was small compared to that of the musket. Typically, it was found in the hands of patriot militia or light infantry units.

Despite extending a soldier’s effective range past 200 yards—accurately, mind you—it has a couple of gaping holes that stymied wider adoption. Compared to muskets, the .40- to .50-caliber rifles were more difficult and time-consuming to load. The grooves could foul after several shots and would require cleaning to regain accuracy. In addition, they were incompatible with bayonets, forcing a rifleman to turn to his knife or tomahawk—undesirably so—upon an infantry charge. Nevertheless, the American Long Rifle did enough damage during the American Revolution to earn a place in the nation’s heart and mythology.

Surgical Precision in a Club Fight

Brutal. Few words better sum up the American Civil War. The advent of the conical Minié Ball in 1849 made the Springfield Model 1851, Pattern 1853 Enfield and other rifled muskets much more accurate. However, rank-and-file fighting was the order of the day, giving both the Blue and the Gray soldiers barn door-sized targets at which to pitch the devastatingly effective soft-lead projectiles.

Known not only for its long-range accuracy but also for the whistling sound its bullet made, the Confederates’ Whitworth dealt out shrill death. It still owns the record for one of the world’s longest kill shots. (Photo: Rock Island Auction Company)
Known not only for its long-range accuracy but also for the whistling sound its bullet made, the Confederates’ Whitworth dealt out shrill death. It still owns the record for one of the world’s longest kill shots. (Photo: Rock Island Auction Company)

Despite the close and grizzly battles, sniper tactics were coming into their own. Both the Union and Confederate soldiers had sharpshooting regiments. Perhaps the most famed was Brigadier General Hiram Berdan’s (the name behind the primer) legendary U.S. Volunteer Sharpshooting Regiments and their Sharps Rifle.

Breechloading, set trigger, capable of delivering its deadly payload past 1,000 yards, the .52-caliber was among the most accurate rifles of its time—a terrifying instrument when you think about it. Remember, many battles were won by those best with the bayonet. A rifle that could knock you out of your brogans, sight unseen, is enough to send chills from leggings to kepi.

Berdan’s men used it to good effect, most notably at Gettysburg. Some even got outfitted with the breakthrough technology of the day—a telescopic sight. And, while its reputation precedes it, the Sharps might not have been the most feared sniper rifle in the War Between the States. That distinction goes to the Whitworth Rifle.

No Civil War long-range shooter is more famed than the Sharps Rifle. Hiram Berdan’s sharpshooting regiments used it to good effect at Gettysburg’s Devil’s Den and Peach Orchard. (Photo: Rock Island Auction Company)
No Civil War long-range shooter is more famed than the Sharps Rifle. Hiram Berdan’s sharpshooting regiments used it to good effect at Gettysburg’s Devil’s Den and Peach Orchard. (Photo: Rock Island Auction Company)

The unusual hexagonal bullets the hexagonally bored rifle shot were known to whistle in flight—a banshee’s shrill that often meant death. However, Union soldiers had good reason to fear the abstruse rifle for more than just the sound it produced: It was capable. One proficient Confederate sent a bullet screaming from his Whitworth in December 1864 at Fort Sumpter to record what was then the longest kill by an American soldier—1,390 yards. Amazingly, the mark stood until World War I and remains in the top 20 of the most lengthy sniper kills of all time.

Even so, the .451-caliber rifle wasn’t a miracle weapon. There weren’t enough to make an impact, and the ones on hand were painfully slow, shot to shot—a curse of most accurate muzzleloaders. Not that either made a difference to a soldier who had a Whitworth bullet whistling toward him.

International Conflict and Sniper Advancement

What we would recognize as a sniper rifle was forged in the crucible of two world wars. Yes, today’s highly engineered metal and synthetic rifles are lighter and more specialized than the Springfield M1903. But, like that old warhorse, modern sniper rifles pretty much remain bolt-actions, firing metallic cartridges, loaded with spitzer bullets and, most importantly, topped off with scopes.


More Sniper Rifles:


The Springfield’s role as the long-range backbone through both wars was default. Similar to most nations after World War I, the United States dismantled its sniper program and did not advance its weaponry by entering its sequel. Consequently, the evolution of the sniper system over this period is mainly defined by optics.

The .30-06 wore two primary scopes in World War I: the Warner & Swasey 1908 (or 1913 Telescopic Musket Sight) and the Winchester A5 Scope. The 5x A5 was the more desirable of the two. But, as is often the case in war, the lesser option was the more prevalent.

Offering assembly line accuracy, the Springfield M1903A4 was the first mass-produced sniper rifle. However, the 2.5x Weaver scope offered little to desire, despite its ruggedness. (Photo: Rock Island Auction Company)
Offering assembly line accuracy, the Springfield M1903A4 was the first mass-produced sniper rifle. However, the 2.5x Weaver scope offered little to desire, despite its ruggedness. (Photo: Rock Island Auction Company)

Warner & Swasey’s Musket Sight was the official U.S. Army scope. By all accounts, it was a dog. In addition to weighing upward of 2 pounds, the prismatic scope was offset from the barrel. Nevertheless, both the ’08 and ’13 models could take a licking. Neither was especially powerful. The 1908 was a more respectable 6x scope but was reduced to 5.2x by 1913 to open the field of view. In either case, the magnification was more than enough for trench warfare. “No man’s land”—the space between opposing trenches—rarely exceeded 300 yards.

The opposite of the Warner & Swasey, Winchester’s scope was top of the line. Mercifully, it also followed the fundamentals of scope operation; chief among these was that it was centrally mounted and turret-adjusted … only, the damned thing was like fighting with a Fabergé egg! The rifle’s recoil, alone, was enough to decimate it, leading to free-float mounting. This meant the eye relief had to be reset after every shot. Still, it was an upgrade for doughboys lucky enough to be issued one.

World War II’s mass production saw the advent of America’s first assembly line sniper rifle—the M1903A4. Not much differentiated it from other Springfields, except that the iron sights were left off to make room for the scope—in this case, the Weaver 340C (the “M73B1,” in Army parlance).

The glass was good and durable, but it wasn’t powered to pick fleas off a dog’s back. At 2.5x magnification, it was, at best, more of a mid-range option. This, combined with the United States having to reboot its sniper program, is perhaps the reason the Yanks struggled early on with their much-more-experienced German counterparts.

05. The Winchester Model 70 rifle marked a break from past military sniper rifle doctrine—namely, the reconditioned match shooters were not service rifles but were specialized for their job. (Photo: Rock Island Auction Company)
The Winchester Model 70 rifle marked a break from past military sniper rifle doctrine—namely, the reconditioned match shooters were not service rifles but were specialized for their job. (Photo: Rock Island Auction Company)

The same can’t quite be said for those in the Pacific Theater. Marine snipers generally had better luck, although they arguably had a system more suited to their application. The rifles were older (the vintage World War I M1903A1), but the scopes were much more appropriate (the Unertl 8x).

What became known as the M1941 Marine Corps Pattern Rifle was a sniper’s sniper system. As they do today, Marines had to know their DOPE and dial in each shot. However, the Unertl made it easy. The scope had oversized turrets, with both tactile and audible clicks. You could get on target, even in the thick of battle. So, what if the free-float mounts meant you had to reset the eye relief after every trigger pull? You had the confidence you’d hit what you aimed at. In the hands of skilled snipers, that was enough.

Semi-automatic snipers rifles—at least in concept—also came about in World War II. However, it would have to wait until Korea to get put to the test.

Crosshairs on East Asia

The contributions of the M1C in the Korean War weren’t child’s play. The semi-auto M1 Garand, modified to accept the M73 scope made by Lyman, was impressive … although it was hampered and overshadowed.

The M1941 Marine Corps Pattern Springfield was an older rifle for its time, but its Unertl 8x scope was much better than other American sniper optics. Note the oversized turrets—perfect for dialing in a precision shot. (Photo: Rock Island Auction Company)
The M1941 Marine Corps Pattern Springfield was an older rifle for its time, but its Unertl 8x scope was much better than other American sniper optics. Note the oversized turrets—perfect for dialing in a precision shot. (Photo: Rock Island Auction Company)

The rifle perhaps didn’t live up to its full potential, typically used 600 yards in, due to the lack of match-grade ammunition. Most simply pitched the somewhat-less-accurate Army-issued M2 ball.

Then, there was the style of battle waged on the Asian peninsula: A big war in a little country, the slaughter was primarily wrought from machine guns, wave frontal assaults and artillery barrages. Despite this, skunk-working snipers came up with some clever systematic advances in Korea.

None was more notorious than Army Major William Brophy’s .50-caliber monstrosity. Essentially, it was a Russian anti-tank rifle with an M2 machine gun barrel slapped on it. Of course, a bipod was necessary—and, for safe measure, a butt pad. For the finishing touch, Brophy crowned it with a 20x Unertl. Real “Frankenstein’s lab” stuff—but effective.

Modified M1 Garands, the M1C and M1D (pictured) played a relatively small role in the Korean War, although they advanced the concept of a semi-automatic for precision applications. (Photo: Rock Island Auction Company)
Modified M1 Garands, the M1C and M1D (pictured) played a relatively small role in the Korean War, although they advanced the concept of a semi-automatic for precision applications. (Photo: Rock Island Auction Company)

Brophy and others were able to make communists “good communists” from 2,000 yards out. More importantly, the first .50-caliber sniper rifle inspired an entirely new concept of what discipline might be. However, we’ll get to that shortly. We still have one more stop in Asia—a tough slog during which the sniper truly came into his own: Vietnam.

Tactically, his role made sense. Small-unit actions lent themselves to a war defined by thick jungles, where finding an enemy to engage was half the battle. It was a hunt and required hunters—such as Carlos Hathcock. An accomplished competitive shooter for the Marine Corps, winning the 1965 Wimbledon Cup at Camp Perry, his marksmanship was unimpeachable. So was his fieldcraft. There’s much written about Hathcock and the patience he showed in the face of hell for a single trigger pull.

A precision stock, such as the McMillan A1 on this M40A1, became one of the major upgrades on modern sniper rifles. Impervious to climatic changes, many were also customizable to a particular shooter’s frame. (Photo: Rock Island Auction Company)
A precision stock, such as the McMillan A1 on this M40A1, became one of the major upgrades on modern sniper rifles. Impervious to climatic changes, many were also customizable to a particular shooter’s frame. (Photo: Rock Island Auction Company)

For the most part, that squeeze for Hathcock and other scout snipers came from behind a heavy-barreled Winchester Model 70. Typically, these were reconditioned Marine Corps match rifles … which might seem a small factor. It isn’t. Why? Simple: The good, old 70 wasn’t a service rifle; it wasn’t even close.

If anything, this showed that the U.S. military was beginning to recognize the particular role the sniper played on the battlefield. He was a specialized warrior who needed a specialized tool. He got it with the protean Remington 700.

Coming of Age

Up to this point, a lot of the sniper rifle discussion has revolved around optics. Make no mistake: In talking M40, M24 and other 700 military variants, this is still an important factor. But it’s not the only one.

From buttstock to muzzle crown, these rifles were specifically tuned for their job. Barrel, trigger, ammunition—nothing was left to chance. Even so, the most obvious development was the stock. Soon after the M40, it was no longer a one-size-fits-all hunk of walnut.

A long way from simple crosshairs, the H-58 grid reticle found in the Leupold Mark 4 6.5–20×50mm on the M2010 arms soldiers with range-estimation tools, as well as a rock solid system for holdover and wind adjustment.
A long way from simple crosshairs, the H-58 grid reticle found in the Leupold Mark 4 6.5–20×50mm on the M2010 arms soldiers with range-estimation tools, as well as a rock solid system for holdover and wind adjustment.

For example, take the Army’s most recent 700 variation, the M2010 Enhanced Sniper Rifle. Little surprise—it wears a chassis. Complete with thumbwheel length of pull and comb rise adjustments, snipers get the same consistent fit that match shooters seek. They should; their target is more vital than a bull’s-eye.

However, the M2010 wasn’t the first to latch onto these concepts. As early as the 1970s, Marine armorers upgraded the M40 with a fiberglass McMillan A1 stock, along with other modifications, creating the M40A1. The stock wasn’t adjustable, but it took inaccuracies due to stock swell all but out of the equation.

And, along with configuration, optics and caliber have also improved the modern sniper system. The M2010 is topped with a Leupold Mark 4 6.5–20x50mm ER/T M5A2 Front Focal variable power for most daylight operations. Aside from more and variable power, the scope uses a Horus H58 grid reticle, giving snipers the ability to hold over, lead shots and deal as never before.

As far as caliber is concerned, the trend has been larger and magnum. True enough, the 7.62 has been the mainstay since right after mid-century. But the .300 Win. Mag. (for which the M2010 is chambered) and .338 Lapua Magnum have become more accepted, just as snipers have become expected to hit longer and harder. Still, even those cartridges are small fries compared to what else presently resides in the sniper’s toolbox.

Not Just Overwatch

Radar arrays are expensive, vital and difficult to replace. It takes serious man-hours to fix a jet engine or delicate communications equipment. It would certainly be a shame if someone went ahead and poked a hole in one. Grasp this, and you grasp the concept of hard target interdiction: Sow chaos through material deprivation. Not that you couldn’t with the tried-and-true 7.62, but something with a little more “oomph” would get the job done with a little more gusto … say, a .50-caliber. Brophy and Hathcock both proved that the .50 BMG is an adequate long-range precision cartridge. Nevertheless, for all but a masochist, their versions aren’t really small-unit mobile.

The Barrett M82. A beast among precision rifles, this semi-automatic .50-caliber has an effective range of 1,900 yards.
The Barrett M82. A beast among precision rifles, this semi-automatic .50-caliber has an effective range of 1,900 yards.

Enter the Barrett M82. A beast among precision rifles, this semi-automatic .50-caliber has an effective range of 1,900 yards. If manning a shoulder-fired .50 sounds about as coveted a position as a crash-test dummy, it should be. Yet, with the Barrett, it isn’t. In part, this is thanks to its weight—a whopping 27 pounds—and a recoil-absorbing barrel assembly. Topped with a 4.5–14×50 Leupold Mark 4, the M82 has dealt its fair share of far-out damage.

In 2004, Sergeant Brian Kremer of the U.S. 2nd Ranger Battalion let loose with his Barrett on an Iraqi insurgent and connected from 2,515 yards out. To save pen and paper calculations, this longest U.S. sniper kill to date came in at just shy of a mile and a half. It’s a testament to where sniping stands today.

Future Sharp Shots

Given that the sniper effective range resides somewhere around mind-boggling, it’s difficult to ponder where it might be in 10, 20 or 50 years from now. It’s certain that equipment—rifle, scope, ammunition—will only continue to improve and, with that, the sniper’s deadly range and role.

But no matter: If it’s a Springfield or some yet-imagined shoulder cannon, his aim will remain constant: One shot, one kill.

The article originally appeared in the June 2020 issues of Gun Digest the Magazine.

Gear To Get: Wheelguns And Revolver Accessories

0

Love the revolver? We gather up great wheelguns and gear to enhance them.

What Are The Top New Revolvers And Gear:

Few things rival the cold steel of a well-made revolver. While semi-auto pistols decidedly rule the roost today, they’ve yet to bury the good ol’ wheelgun. In this installment of Gear To Get, we’re looking at some of the top new wheelguns and accessories to enhance them. For certain, whether you’re looking for a tough-as-nails self-defense revolver or tuned gem to beat the clock in the match, you’ll find something here.

Ruger Custom Shop GP100 9mm

Revolver Ruger GP100

The Ruger Custom Shop has turned out some stunning upgraded models of shooter favorites. It might have outdone itself with the second GP100 to roll out of its workshop. A competitor’s delight, the 9mm wheelgun boasts the extras that should make it a bear in competition, including polished and optimized internals, a centering boss on the trigger and centering shims on the hammer. This trio produces a smooth-as-glass trigger pull and a break as crisp as thin ice. It features a load of other bells and whistles—from a triple-locking cylinder to the Super Redhawk’s action and Hogue hardwood grips. Ruger didn’t get fancy with how the eight-round 9mm loads, however; it stuck with what works: moon clips. MSRP: $1,549

Magnum Research 6-Round Short Cylinder BFR

1 Magnum Research

Magnum Research’s Big Frame Revolver (BFR) is power incarnate. The only thing small about this big-bore revolver is its capacity. Five rounds is the limit when loading up monsters such as the .500 Linebaugh and .45-70 Government. Tweaking the formula a tad for 2020, Magnum Research has added firepower to a revolver that already has the raw variety in spades. The BFR is now available with a six-round cylinder. But, there’s a catch: We’re talking about the short-cylinder .357 and .44 magnums. Nevertheless, it’s still a solid upgrade to a top-shelf handgun. And, besides its enhanced capacity, the revolver sports all the same perks of the previous models and is available with all of Magnum Research’s in-house upgrades MSRP: $1,302

Target Factory Flip-R-Spin Target

1 Target Factory

Punching paper gets a bit dry after a spell. Sooner or later, you want something with a bit more jump and action. The Target Factory has you covered with its Flip-R-Spin 3D target, designed for hours of casual shooting fun. Although the giant, 2.5-inch-diameter jack looks like a typical self-sealing ground target, it offers a whole bunch more. Hollow at the top and bottom, it can be strung vertically or horizontally with a rope as a first-rate spinner. Just as handy: The Flip-R-Spin is recyclable and meets new U.S. Forest Service target material restrictions. It’s perfect for your secret backwoods shooting spot. MSRP: $18.99


Expand Your Gear IQ:


Heritage Rough Rider Rancher Rimfire Revolver Carbine

Revolver Heritage

Generations ago, the lever-action bested the revolving rifle. But, just because the concept never truly caught on doesn’t mean it isn’t fascinating … and fun to shoot. Heritage Manufacturing makes one you can put in your saddle scabbard: the Rough Rider Rancher Carbine. A 16-inch-barreled .22 LR, it’s the perfect pick to rule the ranch or, at least, keep that “herd” of tin cans in order. Holding six rounds, this unique long gun offers respectable capacity and gets you on target quickly with adjustable buckhorn sights. Heritage throws in a leather sling, making this 4-pound, walnut-stocked carbine comfortable to carry and handy for any varmint work at hand. The Rough Rider Rancher will make a one-of-a-kind addition to any collection. MSRP: $297

Speed Beez OWB Minimalist

1 Speed Bee

Low-profile holsters typically add up to an option long on plastic and short on charm. If you’ve had enough of these hangers, Speed Beez has the antidote: the OWB Minimalist. Living up to its name, the Minimalist cuts a waif’s profile on your hip, keeping your J-frame revolver sight unseen—but always at hand. It’s handy, to boot, attaching to your belt via a single, thick leather loop that’s guaranteed not to sag or slant out, even after years of use. Custom hand molded from heavy, top-grain leather with excellent stitching, the holster is an eye-catcher, giving all the class you’d want from steer hide. Best of all, the Minimalist is priced so any wheelgun fan has an easy-to-conceal option. MSRP: $51

NoizeBarrier Micro Earplugs

1 OTTO

Hearing protection and convenience aren’t always synonymous—particularly if you aim to guard your ear holes in the field. OTTO Engineering has gone a long way to erase the dividing line between these facets with its NoizeBarrier Micro Earplugs. Its enhanced hearing protection offers up to 40 dB of noise reduction while amplifying softer sounds by as much as five times. This makes these earplugs ideal for maintaining situational awareness while ensuring you don’t shoot out your hearing. Additionally, the plugs have an incredible battery life: 16 hours between chargings. Yes, they’re rechargeable, so there’s no fussing with battery changes. They’re shipped in an attractive and durable hard case. MSRP: $399

Chiappa Rhino Match Master 6

Revolver Chiappa Rino

Perhaps the most peculiar design in all “revolverdom,” there’s a method to the Chiappa Rhino’s appearance. Aligning the barrel to the bottom of the cylinder knocks the revolver’s bore axis down and, with it, its recoil. This terrific idea now makes its appearance in the competitive field. The .38 Special Match Master 6 is a match-ready version of the Chiappa icon, featuring several upgrades. In addition to its low bore axis, it has enlarged, adjustable sights for a sharp sight picture, a tuned trigger, an adjustable rubber trigger overtravel stop and improved Hogue grips similar to those found on precision shooting irons. Furthermore, for a 6-inch-barreled gun, it comes in at just 2.9 pounds, making it quick on target transitions. MSRP: $2,990

The article originally appeared in the August 2020 issues of Gun Digest the Magazine.

Lipsey’s Goes Old School With Retro Glock P80

0

Glock P80 1

A throwback to the earliest days of polymer perfection, Lipsey's Glock P80 puts a Gen 1 G17 back into shooters' hands.

  • Gen 1 single pin style frame
  • Wrap-around pebble texture grip
  • P80 roll mark
  • Flat Extractor
  • No front cocking serrations

Glock pistols still have a new vibe about them. Polymer frame and all black, the guns seem a rejection of the preceding pistol-smithing dogma and a glimpse into the future. Then the realization washes over Glock made its first appearance when they still sold leaded gas and the Berlin Wall cut the German city in twain. In other words, it's old, or at least vintage enough to merit a retro edition.

Like a favorite song come up on the oldies station that’s exactly what Lipsey’s delivers in its special edition Glock P80. A faithful reproduction of the original pistol adopted by the Austrian Army in 1982, the P80 is a throwback to the 9mm that sparked a revolution. Today we know the pistol as the Glock 17, but the partnership figured they reach back to the gun’s roots and give it a similar designation as military—Glock Pistole 80. For those perplexed about where the 80 comes from, it’s the year the Austrian military announced it sought a replacement for its aging duty pistol—the Walther P38.

Essentially, the new Glock P80 replicates a somewhat rare firearm in the U.S.—the Gen1 G17. First imported stateside in 1986, two short years later Glock introduced its Gen2 pistols, limiting the number of specimens on the market. Lipsey’s retro P80s are likely to prove as rare with a total run of 10,000 planned. Especially given the guns are dead ringers for the original, down to the packaging. Yup, they ship in the “Tupperware” style box shooters remember.

“I have always wanted to do a retro Glock pistol.” Jason Cloessner, Lipsey's Vice President & Product Development Manager said. “Glock took painstaking measures to recreate the original frames and packaging to make this P80 edition as close to the original as we could get. Not only is this edition a great shooter, but it also helps tell the amazing story of how Glock came to be.”

So, what does a shooter get out of a G17 … eh, Glock P80? Certainly not an accessory rail or front cocking serrations. The most notable features are the wrap-around pebble texturing on the grip (no finger grooves), flat extractor, single pin frame and smooth fore—slide and frame. And, of course, a P80 rollmark at the front. Forty years on, it’s still a sleek looking design, one which Glock appears to draw from in its latest generations of pistols. Everything old is new again …

As to price, the Glock P80 commands a decidedly none-1980s price, with an MSRP of $669. Consider it a deal. It’s not uncommon to find a Gen 1 G17 moving north $1,000 on GunBroker.com.

Lipsey's Glock P20 Specs:
Caliber: 9mm
Finish: nDLC Finish
Frame: Polymer Frame
Barrel: 4.49″
Overall Length: 7.95″
Capacity: 17 + 1
Magazines: 2 17 rd.
Weight: 25.26 oz.
MSRP: $669

For More information on Lipsey's Glock P80, please visit lipseys.com.

More Glock Reviews:

Boyds Spike Camp: Drop-In Stock Test

0

Boyds Gunstocks Lead

Boyds Spike Camp is very likely the best aftermarket rifle stock you can buy for the money. The proof is plain as the clover leaves on the target.

What Assets The Spike Camp Delivers:

  • Ergonomically-designed thumbhole
  • Free-floated barrel channel
  • Abbreviated Monte Carlo Comb
  • Manageable 2.5 pounds in weight
  • Durable laminate hardwood construction
  • Pillar bedding available

It used to be that if you wanted to customize or personalize your rifle, you had to enlist the services of a gunsmith. Not only was this time-consuming, it was also expensive. Today—at least when it comes to rifle stocks—shooters have a seemingly endless variety of aftermarket stocks to choose from, with prices ranging from a few hundred bucks to over a grand; and most are DIY projects.

I recently tested a variety of aftermarket stocks and was impressed with how an affordable stock from Boyds performed. Not only was it the least-expensive stock tested, the rifle shot more precisely from that stock than with any of the others. Wondering if this might have been a fluke, I reached out to Boyds and asked if it would support a more comprehensive test.

The inletting on the Boyds Spike Camp stock was exceptionally well-executed and required no final fitting.
The inletting on the Boyds Spike Camp stock was exceptionally well-executed and required no final fitting.

Most of the time, when you read about a replacement rifle stock, it—much like the test I recently conducted—involves only one stock. The results, whether good or bad, are then based on an example of one. As a consumer, you might not feel confident spending your money on a review involving a single sample.

For 2020, Boyds released a new, drop-in rifle stock called the Spike Camp. I suggested that the company send me three of them so I could test them all to determine if they would perform equally well (or badly). Boyds agreed, and that’s the basis for this test.


More Gunsmithing Tips:


Spike Camp Details

In a world of gadgets and adjustable features, the Boyds Spike Camp stock was designed to be an essentials-only stock, costing right at $100. It’s made of American-sourced hardwoods, it’s laminated, and then, it’s passed through multiple CNC processes. Before a stock is completed, it’ll also pass through the hands of more than 20 people to ensure strict quality-control standards are met.

Notes: Three three-shot groups were fired with each rifle stock using the Federal Premium 168-grain Sierra MatchKing load. The total time to fire all three groups with each stock is listed under the “Time” column.
Notes: Three three-shot groups were fired with each rifle stock using the Federal Premium 168-grain Sierra MatchKing load. The total time to fire all three groups with each stock is listed under the “Time” column.

The Spike Camp is about 29 inches long and weighs approximately 2.5 pounds. It’s a thumbhole design with a low Monte Carlo negative drop comb. The forend is relieved enough for the barrel to free float. There are 14 color options available, and sling swivel studs are included as standard. It has a length of pull of 13.5 inches. Front and rear aluminum bedding pillars are available for an additional $55, bringing the total cost to about $170.

Boyds sent me three Spike Camp stocks to fit a Remington 700 SPS tactical AAC-SD. I didn’t request any particular color and ended up with one of each of a Coyote laminate, a Forest Camo laminate and a Zombie Hunter laminate. Other than color differences, all three stocks were identical, including the aluminum pillars.

Establishing a Precision Baseline

Prior to testing, I wanted to establish a baseline for precision with the rifle. With the current AG Composite stock on the rifle, and with the help of a Nightforce ATACR riflescope and several boxes of Federal Premium 168-grain Sierra MatchKing ammunition, I fired three, three-shot groups at 100 yards from a sandbag rest. However, unlike most accuracy or precision tests, I fired these rounds quickly—nine shots in 150 seconds—because I wanted to see how the stock would respond to a hot barrel. The factory Remington-barreled action in the AG Composite stock shot really well, averaging 0.69-inch for three, three-shot groups.

All three of the Boyds Spike Camp stocks were installed and tested from the bench—right at the range.
All three of the Boyds Spike Camp stocks were installed and tested from the bench—right at the range.

Before we get into the actual shooting results with the Boyds stocks, we need to establish a practical fact: When it comes to the measurement and comparison of little groups, the shooter’s skill level is a prime consideration.

With a really good-shooting rifle, I can occasionally shoot groups measuring as small as ½ inch. Regardless of how precise a rifle shoots, if I shoot a group smaller than ½ inch, celebration is in order. I mention this because, as far as I’m concerned—when I’m the one doing the shooting—group variances of under ¼ inch are inconsequential; I’m just not good enough to call a measurement “definitive” that’s that small or smaller.

This three-shot group fired with a Boyds Spike Camp stock measured a scant 0.14 inch.
This three-shot group fired with a Boyds Spike Camp stock measured a scant 0.14 inch.

Now, I know that when I’m compared to other gun writers, it must seem as if I’m a terrible shot. I read those articles about rifles averaging under ½-inch and also about multiple one-hole groups. However, before you start believing I’m just not skilled enough to be a gun writer, consider the fact that I’ve actually seen most of the current gun writers shoot. I know of only a few folks who can consistently shoot groups measuring under ½ inch. It’s not that easy.

So, with that in mind, when you look over the measured groups from this test, I suggest that you consider any groups or averages within ¼ inch of each other to represent the same level of precision. For example, the test rifle averaged 0.69 inch for three, three-shot groups out of the AG Composite stock and 0.81 inch out of the first Boyds stock tested. That’s a difference of 0.12 inch. As far as I’m concerned, the barreled action performed the same from both stocks. On the other hand, the third Boyds stock I tested averaged 0.45 inch, which is 0.36 inch better than the first Boyds stock tested. I’d rate the third stock as delivering a level of precision equal to ¼ inch better than the first stock. Make sense?

The installation of the Boyds Spike Camp stocks was so effortless and easy that it was done at the range, right at the shooting bench.
The installation of the Boyds Spike Camp stocks was so effortless and easy that it was done at the range, right at the shooting bench.

It would appear that the Boyds stock I worked with in my previous test was representative of the line. If you’re confident enough to take my shooting ability as gospel (I’m not!), one of the Boyds stocks performed 34 percent better than the $600 AG Composite stock. One performed 1 percent worse, and one 17 percent worse. But here’s the thing: We’re talking tenths of inches, and we’re talking about shooting three, three-shot groups in under two minutes.

I think it’s fair to say that for all practical purposes, all these stocks delivered the same level of precision and that there was more variance in the shooter than the stocks. I also think it’s fair to say—definitively—that when it comes to Boyds Spike Camp stocks, you can expect one to work just as well as another. And finally, and I’m going out on a limb here: Based on my experience with this manufacturer’s stocks, I wouldn’t have any hesitation in saying that you can expect very good things from them, regardless of the stock you order. And I certainly don’t think they’ll make your rifle shoot worse.

Spending the extra $55 on the aluminum bedding pillars is probably a good idea.
Spending the extra $55 on the aluminum bedding pillars is probably a good idea.

But this needs to be qualified. I tested these stocks with a barreled action that shot very well; it’s one that’s proven to shoot well in many different stocks. But that won’t always be the case. For example, Boyds stocks are made well and very consistently. As a consumer, that’s what you expect, and that’s what you should get.

That doesn’t mean a Boyds stock—or any stock—will make your rifle shoot better. Some rifles come from the factory with a little bit of upward pressure on the barrel from the forearm. This is to help dampen barrel vibrations and allow the rifle to shoot better. You might take an action such as that and put it in a Boyds—or any other stock that free-floats the barrel—and discover the rifle doesn’t shoot as well as it did in the factory stock. After all, rifles can be fickle creatures.

Some Observations

Let me also offer a few additional comments on the Spike Camp stock. The inletting was masterfully done, and the wood-to-metal fit was excellent. The Remington action had a Timney trigger, and no additional fitting was required. Installation only took a few minutes. In fact, I installed all three stocks right at the range.

The Boyds Spike Camp stock comes with a thin, rubber recoil pad.
The Boyds Spike Camp stock comes with a thin, rubber recoil pad.

However, as with almost any rifle stock, it’s critical to tighten the action screws to a specified torque setting. Boyds suggests 27.5 pounds. I used the FixIt Sticks 25-pound torque setting, which seemed to work perfectly. Would glass-bedding have helped? Maybe. But one of the reasons I think the Boyds stocks work so well without bedding is because the recoil lug recess is not oversized (as you might find on many other aftermarket stocks).

Should you order a Boyds Spike Camp for your rifle? I’ll leave that up to you to decide.

I’m not a fan of the thumbhole design. There’s nothing wrong with it, but I just don’t like it: When it comes to rifle stocks, I’m more of a traditionalist. I do, however, like the straight comb with the negative drop on the Spike Camp, which helped mitigate felt recoil very well. I found the stock very comfortable from the bench and when shooting off-hand.

With its curvy appearance, the buttstock end of the Spike Camp stock is a stark contrast to the squared lines of the forend.
With its curvy appearance, the buttstock end of the Spike Camp stock is a stark contrast to the squared lines of the forend.

I think that regardless of your opinion about what this stock looks like, there’s one undeniable fact: A Boyds stock is very likely the best aftermarket rifle stock you can buy for the money—period!

And finally, as a side note, we can’t ignore how well the box-stock Remington-barreled action performed. To come from a rifle with a suggested retail price of only $842, and to average only 0.66 inch for 12 three-shot groups (36 shots) fired in fewer than 10 minutes—which equates to one shot every 16 seconds—is damned astounding! Not a single group fired exceeded the MOA mark!

Boyds Range Test

For more information on Boyds Spike Camp stock, please visit boydsgunstocks.com.

The article originally appeared in the 2020 Buyer's Guide issues of Gun Digest the Magazine.

Audio: Massad Ayoob On Kenosha, Wisc. And Lethal-Force

1

Straight from the horse's mouth. Massad Ayoob dissects the recent police and civilian involved lethal-force events in Kenosha, Wisc.

Quite a summer. Looting, rioting and violence have burned through America’s urban centers like a prairie fire with little else dominating the headlines. Except, perhaps, lethal-force encounters. Several incidents involving both law enforcement and citizens have shined a spotlight on the use of deadly force, for better or worse. Unfortunately most, at least initially, have been distorted with a healthy dose of politics and 24/7 news coverage.

This has been the case in Kenosha, Wisc., which in a matter of days endured a police shooting, riots and a civilian deadly-force encounter. Par typical, the conventional narrative progressed out of the gate on each. But in recent days—thanks to video evidence—a clearer picture has come into focus concerning the finer points of the police’s shooting of Jacob Blake and 17-year-old Kyle Rittenhouse’s use of lethal force. Perhaps no other person is more qualified to give his opinion on both incidents than Massad Ayoob.

A law-enforcement veteran and widely considered among the top experts on concealed carry and self-defense, Ayoob dissects the events in Kenosha on Lars Larson’s radio show. It’s well worth a listen, especially for armed citizens. Not only does Ayoob add a valuable perspective on the current events, but also parses out some important points concerning the use of deadly force.

Indispensable Massad Ayoob Books:

Lethal-Force expert Massad Ayoob
Massad Ayoob

Gun Digest Book of Combat Handgunnery
—Deadly Force
—Gun Digest Book of Concealed Carry
—Straight Talk on Armed Defense
—Combat Shooting with Massad Ayoob

Learn From The Master–Massad Ayoob:


Gaining A Ballistic Data Edge With Labradar

0
The Labradar doesn’t use skyscreens, so there’s nothing to accidentally shoot. The readout gives you all the information you might need: average, high and low, and more.
The Labradar doesn’t use skyscreens, so there’s nothing to accidentally shoot. The readout gives you all the information you might need: average, high and low, and more.

Forget traditional chronographes and their potentially shaky readings. The cutting-edge Labradar makes collecting critical data easy.

What Is The Advantage Of Labradar:

  • Doesn't rely on light for readings.
  • Records data at different distances, giving you a more complete picture.
  • Capable of collecting the average velocity of a set, the high and low, the standard deviation, among other data.
  • Unlike most chronos, the radar can collect shotgun load data.

As a gun writer, I have to chronograph constantly. And, as a long-time shooter, reloader and competitor, every chrono I’ve ever owned, I’ve shot. Every. Single. One.

Until Labradar.

The difference is that the Labradar (also known as “Big Orange”) uses radar, not skyscreens. With multiple settings, there are several ways you can use it, but I find the simplest is triggered radar. That means the vibrations—on the casing—of the sound of the shot trigger the radar pulse that then reads the bullet.

When I was using skyscreens, life could be tough. My gun club ranges are down in pits, with the berms on all sides 20 to 60 feet high and with trees on top. In the winter, I had enough light to chrono—more or less—from 10 a.m. to 2 p.m. With radar, I could chrono by the light of a full moon … or no moon at all.

Yes, It Has its Quirks

Now, the Labradar is not without its quirks. It uses six AA batteries, and they don’t last long. I keep a couple of cheap USB batteries in the chrono box. Those are the ones you can use to juice up your smartphone when the battery gets low. I routinely plug in one of these when I set up and run Big Orange off the USB battery (but you still have to have the AAs installed).

The radar beam is not wide. So, even after you’ve aimed Big Orange, you have to find the sweet spot. Once I find the spot on the backstop that works, I note where my feet are and make sure I’m always lined up the same way.
It takes a moment to read, so you can’t shoot any faster than a shot a second, if that. No big deal; I’m not trying to shoot fast when I’m chronoing.

What You Get

What you get is a system that lets you adjust many details. You can set the distance it reads from—that is, the distance of the bounce-back signal—so you’re always reading from the same point, I routinely use 15 feet at the read spot. You can also have it show you the velocity of the bullet at other distance, out to 100 yards or so, or until it loses the return signal. I’m sure others will find that useful; I just want the 15-foot number.


Expand Your Gear IQ:


You can also get the average velocity of a set, the high and low, the standard deviation—all the details you want or need. It’s also possible to save the data to a card and plug that into your computer later for saving, putting into a spreadsheet, etc.

There’s one more thing that makes the Labradar such a big deal: You can chrono shotgun loads. It isn’t easy for skyscreens to handle the shadows of a shotgun payload with the shot cup and maybe over-powder cards, etc. What really causes problems are the skyscreens being stripped off the rail by errant wads, cards, sabots and muzzle blast. The Labradar, like the honey badger, “don’t care.”

Storage and Tripod

I use an MTM storage box, the ACR5 Ammo Crate, to store the Labradar, batteries, tape, staple gun—you know, all the impedimenta of chronoing that you have to have (well, gun writers have to have). I also picked up a sturdy but inexpensive tripod and leave it on the shelf with the ammo crate.

In addition, I used a label-maker to mark “chrono” and “tripod” on the crate so that I know the chrono crate from the other crates (yes, I love MTM products) and as a reminder to bring the tripod.

A Clean Sweep

I walked by the Labradar booth at the SHOT show. As soon as I saw the chrono, I had to have one and asked the Labradar representative to send me one as soon as the company was sending writer’s samples. I told every gun writer I ran into that day to go find the Labradar booth.

In due time, my Big Orange arrived. I tested it, loved it and was determined to keep it (you might think that gun writers get lots of free stuff. Sometimes, we do. But some products, especially those from small makers, aren’t free).

So, when the Labradar folks named a price, I said, “Sure, I’ll send you a check.” The Labradar boss remarked, “Well, that makes it a clean sweep.” Clean sweep? Yes. You see, every gun writer Labradar had sent a sample to said they would rather pay and not send it back when they were told its price.

When a group of people—in this case, gun writers (who are universally cheap and accustomed to getting freebies)—all say, “I’ll pay,” you know it’s something worth having.

Since receiving the Labradar, I haven’t touched the skyscreen chronos, and I might just give all of them away—except one, just as an insurance policy.

The article originally appeared in the January 2020 issues of Gun Digest the Magazine.

Got-To-Have Long-Range Shooting Gear

1

Marine Corps veteran sniper Frank Galli highlights the past year's top long-range shooting gear, from the must-have ammo to the on-target stocks and scopes.

What's The Top Long-Range Shooting Gear:

Bullets And Ammo

  • Hornady A-Tip
  • Prime Ammunition
  • Berger-Lapua Ammunition

Long-Range Rifle Stocks

  • McMillan A10
  • Cadex Nuke Chassis
  • MDT Chassis

Long-Range Riflescopes

  • Zero Compromise
  • Nightforce NX8

Looking at the year in review regarding which new piece of equipment performed as advertised—versus products that did little more than help lighten your wallet—can be tough. So, let’s get down into the weeds with some of the best long-range shooting equipment of thepastyear.

Bullets And Ammunition

My top choice for 2019 in the bullet category is the Hornady A-Tip. The A-Tip seeks to fill the distance between a machined solid bullet and a lead-core variant. Its success was immediate, winning practical rifle matches across the United States. Hornady squeezed everything it could out of the A-Tip, and I highly recommend these bullets if you’re looking to take advantage of the consistency.

Sold in matched lots, Hornady A-Tips bring accuracy and precision to a new level.
Sold in matched lots, Hornady A-Tips bring accuracy and precision to a new level.

The changes made by Prime Ammunition comprised the other standout for me. Full disclosure: I’m a Prime Ammunition shooter and have used Prime religiously for years now. The new, improved Prime is from a U.S.-based manufacturer and features Peterson brass. Can the brass make that big a difference in a factory offering? Well, yes, it can!

Not to be outdone, the new Berger-Lapua factory ammunition is every bit as good, with a nice variety in both bullet weights and calibers. When shooting the 6mm Creedmoor from Berger, the results are impressing everyone. You find 6mm dominating the PRS/NRL competition circuit; besides, having excellent factory ammo is a plus. We all win when companies compete. You get Berger bullets and Lapua brass—a winning combination used by handloaders every, single day. Not everyone has the time or resources to make their own, so great sources in factory ammunition open the door widely.

Berger’s factory ammo is every bit as good as other top contenders, with a solid selection of bullet weights and calibers.
Berger’s factory ammo is every bit as good as other top contenders, with a solid selection of bullet weights and calibers.

Finally, I want to touch on the .224 Valkyrie, which stumbled a bit on its initial release. Even so, after a year or more of using it, I’m still impressed. Federal has revamped the 90-grain factory load to clean up the accuracy variations people were seeing. Was it the twist rate? No, it was the ammunition. I tend to shoot more of the Hornady 88-grain versus the other weights, but more and more, we see fantastic and inexpensive factory ammo for the Valkyrie. If the negative Internet reviews kept you on the fence, trust me—it remains one of my favorite cartridges to shoot.


Get On Target With Frank Galli:


Long-Range Rifle Stocks

Because I’m a bit shorter in stature, I’ve almost wholly transitioned to chassis in my rifle builds. More adjustability means more comfort for the shooter.

McMillan A10 Stock
McMillan A10 Stock

Back in 2018, I think every rifle I was shooting was in a chassis. This year, this situation changed when McMillan offered the A10 stock, designed in part with help from Regina Milkovich. If you don’t know that name, you should: Regina is the only woman to win a PRS competition head to head with everyone else.

The A10 takes a traditional McMillan fiberglass stock and shrinks it down a bit, creating a more comfortable experience for smaller shooters. With new materials, such as carbon-fiber shells, and mixing up the fill, it’s easy to fall in love with fiberglass again.

Cadex Strike Nuke Chassis
Cadex Strike Nuke Chassis

My honorable mention in the stock category goes to Cadex for the Strike Nuke Chassis. The Strike Nuke is an internal chassis with the external look of a traditional stock. It has modern lines and the attachment points necessary to meet most shooters’ needs. For me, the most significant selling point of the Cadex is its price point: Starting at $599 retail, it’s very affordable.

Finally, I want to give a shout-out to MDT, which has established itself as the leader in the chassis department. If you’re going to upgrade your stock and are confused by the options, you won’t go astray buying an MDT chassis.

Long-Range Riflescopes

There are so many great scopes, and the prices are trending lower, but it’s hard to lay down your money sight unseen.

First place in the long-range riflescope category goes to Zero Compromise. I’m currently running both the 4-20x Ultra Short and the full-sized 5-27x. The quality, clarity and tracking of both optics are stellar.

Nightforce NX8 Riflescope line
Nightforce NX8 Riflescope line

Using the 5-27x on the MCM A10 rifle chambered in 6.5 Creedmoor complements the caliber. I can push the rounds out to 1,500 meters with no problem, and the fidelity of the Zero Compromise is second to none. I have the 4-20x ultra-short on my bolt-action .224 Valkyrie rifle.

Also, the Zero Compromise reticles were designed with speed and accuracy in mind. They’re not too cluttered and still give you that excellent floating dot for pinpoint precision. I’m running the MPCT 1 reticle, as well as the MPCT 2, which features a Christmas tree-style holdover area. They’re balanced in both line weight and design.

Zero Compromise Riflescope
Zero Compromise Riflescope

Honorable mention in the scope category goes to Nightforce and its new NX8 line of scopes, including a 1-8x, 2.5-20x and 4-32x. These are feature-rich scopes with zero stops, Digi-illumination and impressive variable-power ranges. Cost-wise, they fall closer to the higher end of the spectrum. Retailing around $2,000 each, they nevertheless punch above their weight class.  

Editor's Note: This article originally appeared in the December 2019 issue of Gun Digest the Magazine.

Glock 43X and 48 MOS Offer Optic-Ready Carry

0

Still as slim and easy to carry, the Glock 43X MOS and Glock 48 MOS offer optics-ready options in the Slimline series.

Two trends dominate new handgun releases: ultra-slim 9mm pistols and optics ready-slides. Glock marries these two elements with the release of Modular Optic System (MOS) models of its easy-to-carry Slimline series.

The Glock 43X MOS and Glock 48 MOS feature factory-milled slides, which make the addition of a micro reflex site a snap. Though, don’t expect the pistols to play nice with every red-dot on the market. Given the guns’ whisper-thin widths, the slide cut is only compatible with specific micro-reflex optics, including Shield RMSc and JP Enterprises’ JPoint. In addition to this, the Glock 43X MOS and Glock 48 MOS also have non-standard accessory rails, meaning not every weapon light can attach to the pistols. Points to remain conscious of when accessory shopping for the guns.


Cover Your Six, Get More Conceald Carry Info:


Despite these idiosyncratic features, the pistols still retain all the features that made them a hit when they were released in 2019. First and foremost among these is an excellent compromise between an easy-to-carry defensive pistol and capacity. Both the Glock 43X MOS and Glock 48 MOS hold 10 rounds, but come in packages weighing in at less than 20 ounces and both 1.1 inches in width. The difference between the pistols is the G48 has a 4.17-inch barrel compared to the G43X’s 3.41. On top of ample capacity and unimposing dimensions, the G43X and G48 MOS incorporate Glock’s Gen5 technologies, including reversible magazine catch, the company’s match-grade Marksman Barrel and nDlC finish.

“Engineered with the Glock perfection promise, the two new models are the first Slimline pistols to offer a MOS option and are ideal for shooters everywhere,” said Shelby Lasater, Glock, Inc., Director of Marketing. “The versatility of the Slimline MOS models give them the adaptability and ease of use for concealed carry, target shooting, law enforcement, and competition which make them a new favorite.”

For more information on Glock 43X MOS and Glock 48 MOS, please visit glock.com.

Glock Talk: Discover Glock Reviews

Upgrading And Customizing The Tikka T3 And T3x

0
The Tikka T3 Hunter chambered in .308 Winchester is a gorgeous rifle, perfect for hunting all over North America.
The Tikka T3 Hunter chambered in .308 Winchester is a gorgeous rifle, perfect for hunting all over North America.

The Tikka T3 and T3x aren't only budget-friendly, top-performers. The Finnish rifles are also easily customized to excel in any endeavor.

Gun-Digest-2021
This article is an excerpt from Gun Digest 2021, 75th Edition available now at GunDigestStore.com.

In 1918, Finnish firearms company Tikkakoski started to manufacture firearms components. Sixty-three years later, Tikkakoski and another Finnish firearms company, Sako, collaborated on a prototype rifle. Sako then purchased Tikkakoski from Nokia in 1983. The companies merged to create Oy Sako-Tikka Ab, which later became Sako. A world-class manufacturer of hunting, law enforcement and military rifles, Sako positioned the Tikka brand as a “budget” class of rifles. The Beretta Holdings Group purchased Sako in 2000, and in 2003 the Tikka T3 rifle was released to the market. After over a decade of success with the Tikka T3, Tikka released an updated version, the Tikka T3x, which debuted in 2016.

Being Sako’s budget brand does not mean these rifles are cheap or of poor quality. The Tikka T3 has been well-received by the U.S. market and is noted for its accuracy, versatility and excellent trigger. Tikka offers models for hunting, law enforcement, and precision-rifle applications.

Tikka offers the T3 and T3x exclusively as long-action rifles. The actions have a round bottom and calibers run from .204 Ruger up to .300 Winchester Magnum. Many gunsmiths will note that the Tikka action tends to be true and requires little blueprinting. Like the universal action size, Tikka uses one magazine size with internal magazine blocks to accommodate the different calibers. Bolt travel differs based on cartridge length, with Tikka using two different bolt stops, depending on the caliber.

Both of these semi-custom Tikka T3 and T3x rifles have an aluminum bottom metal from High Desert Rifle Works and are attached to Boyds At-One stocks. Simple upgrades make a good rifle even better.
Both of these semi-custom Tikka T3 and T3x rifles have an aluminum bottom metal from High Desert Rifle Works and are attached to Boyds At-One stocks. Simple upgrades make a good rifle even better.

The action is secured by two M6 metric thread action screws, and mates with the stock via an aluminum recoil lug. Tikka offers rifles that have an integrated Picatinny scope base, and some with a plain dovetail that can accept proprietary scope rings. The single-stage trigger on the Tikka T3/T3x is user adjustable between 2 and 4 pounds. The trigger is crisp and noted as one of the best factory triggers available. Both Tikka and Sako barrels are cold hammer-forged and are made side by side in the same factory. Tikka guarantees a five-shot 1-MOA guarantee on its heavy barrel rifles, and a three-shot 1-MOA guarantee on its sporter barrel rifles.

The Tikka rifle receiver features broached raceways to accommodate the two lugs on the bolt. Bolt throw is 70 degrees, and the Tikka T3/T3x has one of the smoothest actions on the market. The bolt has a Sako-style extractor and a spring-and-plunger ejector. The bolt handle is dovetailed into the bolt and can easily be removed by the end-user. The shroud on the Tikka T3 bolt is polymer and, like the bolt handle, it can easily be customized with an aftermarket option. The Tikka T3x bolt shrouds are aluminum. The bottom metal is constructed of polymer on both the Tikka T3 and T3x.

Tikka launched the Tikka T3x in 2016 and made changes to both the receiver and the stock. On the receiver, Tikka opened up the ejection port, which allows users to easily feed one round at a time. Tikka replaced the polymer bolt shroud with an aluminum one and changed the aluminum stock lug to steel. The steel lug addressed deformation issues that had occurred with large-caliber rifles. The top of the receiver was drilled and tapped to accommodate a Picatinny rail; this modification was also possible with the Tikka T3, but Tikka felt there was room for improvement.

This Tikka T3 is chambered in 6.5 PRC, mated to a Modular Driven Technologies ESS Chassis, and was custom-built by Bill Marr of 872 Custom Gunwerks. The factory Tikka trigger is excellent.
This Tikka T3 is chambered in 6.5 PRC, mated to a Modular Driven Technologies ESS Chassis, and was custom-built by Bill Marr of 872 Custom Gunwerks. The factory Tikka trigger is excellent.

The most significant aesthetic change was the inclusion of a modular stock that features interchangeable pistol grips and fore-ends. Through the Beretta store, customers can purchase grips and fore-ends with different textures, sizes and colors. The stock is filled with foam inserts to dampen noise, and an enhanced recoil pad mitigates felt recoil.

Tikka T3/T3x Analysis

Over the years, I have owned a suite of Tikka T3 and Tikka T3x rifles. To me, the Tikka T3/T3x is analogous to a Glock 19: It is an inexpensive, quality firearm that simply performs. I am not afraid to damage it and will modify it to suit my needs. I rarely get attached to my stock Tikkas and see them as tools to perform a given task. These tough rifles can be easily customized and tend to hold their value. I have never owned one that failed to hold MOA, given good factory ammunition and solid shooting fundamentals.

 Tikka’s feed from a polymer magazine. Tikka uses blocks in the magazine to accommodate the various caliber configurations. Metal magazines do exist, though the author never had a problem with the factory polymer magazines.

Tikka’s feed from a polymer magazine. Tikka uses blocks in the magazine to accommodate the various caliber configurations. Metal magazines do exist, though the author never had a problem with the factory polymer magazines.

For years, I thought the Tikka T3 was good out of the box, but after owning a few Tikka T3x rifles, I appreciate the upgrade. A common complaint about the Tikka T3 bolt was the plastic bolt shroud. I never took issue with this or had one fail in the field, but I am glad Tikka addressed this issue by making an aluminum bolt shroud standard on the Tikka T3x series. The custom grip and fore-ends are a nice touch, and the larger ejection port does ease loading of single rounds. Did I ever have problems after attaching a Picatinny rail to my Tikka T3? No, but if user feedback demanded a more solid rail interface, I am glad Tikka took note and put its engineers to work upgrading this component on the Tikka T3x. Tikka offers both right- and left-handed models.

Modifying The Tikka T3/T3x

Except for the Tikka T3x CTR, T3x UPR, T3x TACT A1, and the Tikka T3 Super Varmint, Tikkas do not have a Picatinny scope base. The rifles without scope bases use a specialized scope ring, which is readily available from a variety of manufacturers. These rings mount directly to the top of the receiver. In my experience, this is a lightweight, streamlined way to install a scope. If you attach a Picatinny scope base, this modification will raise up your scope and you might need to raise your comb height to ensure a proper cheek weld. This subsequent adjustment is paramount if you train and shoot in the prone position. Raising the comb can be accomplished either by building up the comb with tape and padding or by installing a nylon comb riser/ammo pouch. Kalix Teknik of Sweden makes a retrofit kit that looks like it was installed at the factory and requires only a slight modification to the rifle. The CR-1 has an adjustable comb, secured inside the rifle buttstock by an aluminum assembly. A knob on the stock allows the user to secure the comb at the desired height. In my opinion, the Kalix Teknik CR-1 is the best aftermarket accessory currently available for adjusting comb height.

Both of these semi-custom Tikka T3 and T3x rifles have an aluminum bottom metal from High Desert Rifle Works and are attached to Boyds At-One stocks. Simple upgrades make a good rifle even better.
Both of these semi-custom Tikka T3 and T3x rifles have an aluminum bottom metal from High Desert Rifle Works and are attached to Boyds At-One stocks. Simple upgrades make a good rifle even better.

Except for the T3x TACT A1, Tikka rifles tend to be on the lighter side in terms of weight. A lightweight rifle is fantastic to carry around the woods all day. The only drawback of a lightweight rifle is increased recoil. The easiest way to decrease recoil on a lightweight hunting rifle is to add a muzzle brake and a recoil pad. If you do add a muzzle brake, hunting with hearing protection is absolutely mandatory. Training and getting proficient with a light rifle are easier when excessive recoil is mitigated. This adjustment is particularly important for small-statured or new shooters.

If I wanted to set up the optimal Tikka T3/T3x for a lightweight hunting rifle, I would start with a Tikka T3/T3x Lite and install a LimbSaver buttpad. Tikka did upgrade the buttpad on the T3x rifles, but I think a LimbSaver is still superior to the factory product. If, after installing a Limbsaver recoil pad, I cannot comfortably zero a rifle and gather ballistic data out to 600 yards on an 8-inch steel plate, I will consider a muzzle brake. My 6.5 Creedmoor backcountry hunting rifle did not require a brake and was a joy to shoot, even in the prone position. My .308 Winchester and .300 Winchester Short Magnum both have muzzle brakes.

I also would replace the polymer bottom metal with an aluminum bottom metal from High Desert Rifle Works. An aluminum bottom metal mitigates fliers and increases the tension between the action and the stock. Though anecdotal, I believe that an aluminum bottom metal leads to a more accurate rifle by positively affecting barrel harmonics, and it will never crack. Unfortunately, I have had factory Tikka polymer bottom metals break, where the action screws interface with the bottom metal. In my home state of New Mexico, it can be near freezing in the morning and 95 degrees in the afternoon. This heating-and-cooling cycle is tough on polymers, and all my backcountry Tikkas have aluminum bottom metals.

Tikkia 10
A custom 6.5 PRC build by 782 Custom Gunwerks. This rifle features a 20 MIL prism from TACOM HQ that allows for shots past 1 mile.

One area where I don’t mind weight is in my rifle scope. Hunting in the West requires quality glass and, potentially, 400- to 500-yard, cross-canyon shots. For a scope, I would select a TRACT TORIC UHD 30mm. These top-of-the-line scopes use premium glass and feature a MIL-based reticle that allows you to hold for elevation and wind.

For a general-use rifle where weight is not a concern, I would install a muzzle brake and look at a stock with more features, like adjustable length of pull and comb height, and modular interfaces for bipod and sling attachment. Suitable candidates would include the Boyds At-One Thumbhole Stock, Kinetic Research Group Bravo stock, and my new favorite, the Modular Driven Technologies XRS. I would also consider attaching a suppressor to the rifle.

Custom Tikkas

Since the Tikka T3/T3x is a long action, it has a lot of versatility for caliber selection and is perfect for a custom rifle. About 10 years ago, I found a .300 WSM in a gun store being sold for $275. I asked the clerk why the rifle was so cheap, and he responded that the seller found the recoil to be hellacious and could not effectively use the rifle. Twenty minutes later, I was the new owner of a Tikka T3 chambered in .300 WSM. I threw the rifle in my safe and forgot about it. Fast forward to the 2018 SHOT Show, where I first saw the 6.5 PRC round from Hornady. When I got home from SHOT Show, I contacted Bill Marr at 782 Custom Gunworks and inquired about rebuilding my .300 WSM into a 6.5 PRC. Bill said it wasn’t a problem, and noted that my request couldn’t have come at a better time because he had just received a 6.5 PRC reamer. I shipped my Tikka T3 to Long Island, New York, and, several weeks later, received a custom Tikka rifle. The rifle featured a 26-inch 1:8-inch twist Shilen Select Match Barrel, and the barreled action was mated to a Kinetic Research Group Bravo chassis. The rifle launches 147-grain Hornady ELD-M rounds at 2,920 fps, and can easily hold five-shot, sub-.40-inch groups.

This Tikka T3 Lite is chambered in .308 Winchester, mated to a Boyds At-One rifle stock with a Nikon Black riflescope and an AMTAC Mantis P Suppressor. It is perfect for 800 yards and in.
This Tikka T3 Lite is chambered in .308 Winchester, mated to a Boyds At-One rifle stock with a Nikon Black riflescope and an AMTAC Mantis P Suppressor. It is perfect for 800 yards and in.

The rifle was immediately put to work dispatching coyotes at long range and has been used on several long-range antelope hunts. I can get consistent hits on a 24-inch plate at 2,000 yards and, besides long-range predator control, I use the rifle when I have to test optics and optical accessories past 1,800 yards. The only change I have made was swapping out the Kinetic Research Group Bravo chassis for a Modular Driven Technologies ESS Chassis. The Modular Driven Technologies chassis has better comb and buttpad adjustments and complements lights, lasers, and clip-on thermal and night-vision technology.

If you have an old Tikka T3/T3x that you want to rebuild or customize, contact 782 Custom Gunwerks, or Oregon Mountain Rifle Company. 782 Custom Gunwerks is one of the premier gunsmiths in the United States and has expertise in building custom Tikkas. Bill Marr, the owner and lead gunsmith, can do anything you want to a Tikka. Oregon Mountain Rifle Company offers a Tikka T3/T3x Upgrade Package, in which it installs a carbon-fiber barrel, muzzle brake and carbon-fiber stock.

Closing Thoughts

The Tikka T3/T3x are fantastic rifles. Tikka rifles start at around $550 for a Tikka T3x Lite model and go all the way to $1,800 for a chassis-style Tikka T3x TAC A1. These rifles can be purchased stock and immediately put to work, or customized to meet a particular use. In the last several years, I have observed a robust aftermarket segment materialize.

This 6.5 PRC achieved a 60-percent hit rate on a 24-inch plate at 1,800 yards in 25-mph wind.
This 6.5 PRC achieved a 60-percent hit rate on a 24-inch plate at 1,800 yards in 25-mph wind.

At the 2018 SHOT Show, Tikka released the Tikka T1x MTR, a rimfire chambered in .22 LR and .17 HMR. These rifles are perfect for training and hunting, and are extremely popular in the NRL22, a .22-caliber-specific league of the National Rifle League. At the 2020 SHOT Show, Tikka released four new models. The T3x Lite Veil Wideland and Veil Alpine feature fluted barrels and bolts for weight reduction, muzzle brakes and a nice hydrographic camo pattern on the stock. The T3x Lite Roughtech is similar to the Veil in that it has a fluted barrel and bolt and a muzzle brake, but has a textured stock that provides extra grip in inclement weather conditions. The final rifle debuted was the Tikka T3x UPR, or Ultimate Precision Rifle. The UPR has a modern, but traditional, form factor, adjustable comb, threaded, medium-profile barrel, and a 0- or 20-MOA scope base. This rifle is optimal for precision-rifle applications. The Tikka lineage has been producing firearms and firearms components for over 100 years. Tikka’s are my go-to rifles, and I am excited to see what this company does in the coming years.

For more information on Tikka rifles, please visit tikka.fi/en-us.

Editor's Note: This article is an excerpt from Gun Digest 2021, 75th Edition available now at GunDigestStore.com.

Reloading: The Day The Ammo Disappeared

0

Reloading 2

The focus of reloading has been precision shooters, extreme-long-range shooters and the safari crowd. And then, the factory ammo dried up.

There was a time when I could—rather confidently—make ammunition that was more accurate than the factory stuff. In fact, it was that attribute that led to my love of reloading. There was also a time when the final cost of reloaded ammunition was radically lower than purchasing premium ammunition. Looking at the rising costs of components, that might need to be re-evaluated as well.

Each year, fewer reloaders are casting and shooting their own bullets—although those who do are fervent about that pastime—and those reloading for the economic benefits seem to be scratching their heads, because the bulk packages of the most popular cartridges have become much more available and affordable. Simply put: You can buy a weekend’s worth of ammunition for just about the same price that you can make it … without losing the time at the reloading bench.

Lest all these sentiments sound depressing—or, even worse, you think I’m getting down on reloading—please allow me to put your worries to rest. I think things have changed … but that change is for the better. Looking at how our sport has evolved over the past couple of decades, I feel that hunters and shooters are simply shooting more. When I was a young man, target shooting, at least anything to the extent that’s common today, simply wasn’t as popular as it is now. A box of cartridges for your deer rifle might last three of four years; and if you burned up a box of .22LRs at paper, you were serious.

Reloading Improvements

When I got into reloading, the sheer amount of testing that needed to be done came with a vast increase in trigger time, and I noticed the improvement in my own shooting. So, for that, I’m forever grateful. With the recent popularity of long-range shooting (and hunting), along with the undeniable improvements in optics, rifles and cartridges, more people have become interested in precision shooting.

Check Out:Gun Digest Reloading Data Center

Reloading 3Both precision shooting and extreme long-range shooting have become very popular, and our reloading gear is definitely aimed at that crowd.
Both precision shooting and extreme long-range shooting have become very popular, and our reloading gear is definitely aimed at that crowd.

Looking around the reloading industry, I know I’m not alone in thinking that precision shooting is where the mindset lies, because nearly all the new reloading gear is directed to this end. Whereas in the past, we reloaders were pleased with a set of dies that were nothing more than dimensionally correct, the latest dies are much more than that.

Improvements such as micrometer adjustments for seating depth; brass bushings that minimize the amount of stretch for your particular case mouths in order to extend case life; powder dispensers capable of unprecedented accuracy; and powders that deliver tighter tolerances than ever before (and let’s not forget the excellent developments in bullet technology, both in the hunting fields and at the target range) have all added up to handloaded ammunition that’s unprecedented.

As I stated in the opening of this article, our factory ammunition is absolutely better than it’s ever been, rendering the efforts of some aspects of handloading nearly pointless.


Load Up On Reloading Info:


The expense of factory-loaded safari ammunition, alone, warrants handloading for the big-bore cartridges. The author’s .470 NE runs best with handloaded ammo.
The expense of factory-loaded safari ammunition, alone, warrants handloading for the big-bore cartridges. The author’s .470 NE runs best with handloaded ammo.

As a matter of fact, I was recently chatting with a couple of professional shooters (one having recently won the King of Two Miles competition), and they both admitted to using factory ammunition for training or working with newer shooters while using handloaded ammunition for competition. The subtleties of each barrel warrant handloaded ammunition, especially at extreme long ranges.

New RCBS and Redding Tools

Each year, new tools are available to tighten tolerances and help create the most uniform ammunition possible. RCBS has introduced its new MatchMaster powder dispenser, which is an improvement on its already wonderful ChargeMaster 1500. The new dispenser uses two powder feeding tubes. When set in “match” mode, it’ll accurately measure down to .04 grain. When in “standard” mode, it’ll dispense faster than any of the previous units. This higher accuracy level has resulted in more-uniform, more-accurate and more-consistent ammunition.

Along with the powder dispenser, RCBS has unveiled its MatchMaster die sets, which utilize sizing bushings to extend the life of your brass and obtain a uniform neck tension, as well as a micrometer adjustment on top for precise seating, much like the Redding micrometer die sets. But the RCBS MatchMaster has a unique and very convenient feature: a window cut into the die body in order to easily feed the bullet prior to seating. Well played, RCBS!

The Redding Neck Concentricity Gauge will show you the condition of your brass cases before you even start—it’s perfect for the perfectionists among us.
The Redding Neck Concentricity Gauge will show you the condition of your brass cases before you even start—it’s perfect for the perfectionists among us.

Redding recently introduced its Slant Bed Concentricity Gauge, an ergonomic means of observing the concentricity of case necks and bullet runout, in order to improve the performance of both handloaded and factory ammunition. Much like the rest of the Redding line, this concentricity gauge is well-thought-out, fast and effective. Simply put: Concentric ammunition tends to be more accurate than non-concentric ammo, and this ingenious, little tool from Redding will help make you a better shooter.

Big-Bore Safari Rifles

The big-bore safari rifles comprise another area that still receives a bunch of attention from handloaders. Yes, our factory ammo for the safari guns is probably the best it’s ever been, but many of those cartridges are seriously expensive—sometimes, about $10 per cartridge. Through handloading, these big guns can be well-fed while cutting costs drastically.

There are many excellent dangerous-game bullets—both expanding softpoints and non-expanding solids—which simply are not available in factory-loaded form. North Fork, Hawk and Cutting Edge Bullets from the United States and Peregrine and Dzombo bullets from South Africa are excellent designs, yet they must be handloaded.

The new RCBS MatchMaster powder dispenser will weigh charges down to 0.04 grain. This is one serious unit!
The new RCBS MatchMaster powder dispenser will weigh charges down to 0.04 grain. This is one serious unit!

Without handloading, we’d have missed out on some great combinations. And with handloaded big-bore ammunition, I’ve seen some accuracy from the .375s, .416s and .404s with handloaded ammo that would rival many .30-06s and other popular deer calibers.

For the double-rifle crowd, handloading can most definitely be a lifesaver. When a double-rifle is regulated to a particular bullet weight at a particular velocity, any deviation from that combination will show the results on the target. Handloaded ammunition has made the difference in quite a few older guns, which were regulated with the British ammunition that’s rarely available anymore. I handload the ammunition for my Heym 89B .470 NE, and while there are a few factory loads that the rifle likes, my handloads still perform the best.

I like both Redding and RCBS dies for my big guns, but keep in mind that for some—the .500 Jeffery comes quickly to mind—you’ll need an adapter nut to change from ¾- to 1-inch-diameter die bodies; and you’ll also need a press that can accommodate that change.

In my opinion, at least while this era of available ammunition lasts, the focus of reloading will be the precision shooters, extreme-long-range shooters and the safari crowd. Much like rifles, cartridges and optics designed for the precision crowd—along with our reloading presses, dies and powder dispensers—have gone through changes that have resulted in better ammunition and a more positive shooting experience.

I head afield more confidently than ever before, knowing that I’m the weak link in the chain—not my gear or ammunition. And I’m certainly OK with that.

Editor's Note: This article originally appeared in the 2020 Buyer's Guide issue of Gun Digest the Magazine.

Why The Mauser C96 “Broomhandle” Still Looms Large

2

Mauser C96

The landmark Mauser C96 design changed things in a dimension far beyond the world of the pistol and still looms large in the mind today.

Why The Mauser C96 Still Looms Large:

  • Considered the first truly successful semi-auto pistol.
  • Operated through a short-recoil, locked-breech mechanism.
  • Awkward grip-shape gave it the nickname “broomhandle.”
  • Loaded via a stripper clip.
  • Tangent sights supposedly could be adjusted for accurate fire at hundreds of meters.
  • A detachable buttstock was available, converting the pistol into a carbine.

The C96 pistol is one of the most recognizable handguns ever made. Its integral magazine, loaded via stripper clips, sat ahead of the trigger guard, and its rather awkward grip-shape gave it the nickname “broomhandle.” The C96 was the first military semiautomatic pistol to prove itself both rugged enough and reliable enough for field use, though its substantial size and a shape not conducive to concealment would limit its appeal as a “personal gun.” Its stripper clip loading mechanism would never be as fast to reload as a semiautomatic with removable box magazines, particularly if the design encompassed the thumb button magazine release popularized by the Luger of 1902.

Many of these Mauser pistols left the factory with tangent sights that could supposedly be adjusted for accurate fire at hundreds of meters. That proved to be rather over-optimistic. However, the Mauser was a far-reaching weapon in a much more important way. It was a harbinger of things to come, of the profound changes in battle tactics and technology that would take place in the 20th century.

A brief history Of The Mauser Pistol

Completed in prototype in the year 1895, patented in 1896, and coming off the production line in 1897, this pistol would be produced by Mauser until the late 1930s. It was the first truly successful semiautomatic pistol. The design is credited to three brothers: Fidel, Friedrich, and Josef Feederle.

Pistol in wooden holster/case/shoulder stock.
Pistol in wooden holster/case/shoulder stock.

Patented with a spur-shaped hammer, the gun would be produced primarily with a ring-shaped hammer, and for a time early in its epoch with a “coned” hammer. This had extensions that tapered out to the sides, intended to give better traction to the shooter’s thumb, rather like the hammer spur attachments found on modern lever action rifles that have been mounted with telescopic sights.

Built with a short-recoil, locked breech mechanism, the C96 loads with stripper clips through the top of the mechanism’s ejection port. The rectangular bolt enclosed in its receiver or frame is locked back during this procedure. A rearward tug on the bolt then chambers the topmost cartridge. While awkward and cumbersome by today’s standards, the Mauser C96 design represented a quantum leap forward in handgun reloading speed in the late 19th century.

Its integral magazine machined into the gun forward of the trigger guard, the magazine’s housing normally extended down level with the bottom of the trigger guard. It rode higher, almost to the top edge of the trigger guard, on the rare and short-lived compact model that did not survive into the 20th century; this model held only six cartridges. Still rare, though not as much so, were the later machine pistol variations with detachable, extended magazines that reached down almost parallel with the butt of the gun.

Mauser pistol with its attachable shoulder stock.
Mauser pistol with its attachable shoulder stock.

There were long gun versions, notably the Kavallerie Karabiner (cavalry carbine, complete with a wooden fore-end that extended from the magazine to well out under the barrel). Far more popular, however, was the detachable buttstock fitted to a C96 pistol with standard length barrel. This was made of wood, of course, and was cleverly hollowed out to also be a combination holster and storage box for the pistol itself, attaching to the rear of the grip frame and turning the pistol into a light, handy, short-barreled carbine. An ad for the gun, circa 1900, promised: “The Pistol is provided with a Walnut Butt Stock instantly attachable by a sliding tennon and spring catch to the back of the Grip.(sic) When not in use as a stock this Butt serves as a Holster its interior being hollowed out to the shape of the Pistol whose Grip projects about half its length outside to facilitate quick drawing.”


Take Aim At Classic Guns:


Over a span of some 40 years, Mauser produced approximately a million of these pistols. A very significant quantity of Mauser C96 copies were produced in Spain, mostly under the Astra and Royal marques, the latter produced by Beistegui Hermanos. In China, this pistol was adopted by military and police alike, and became hugely popular when the 1919 Arms Embargo Agreement stopped the import of battle rifles into that country. A loophole left shoulder-stocked pistols exempt, and Chinese warlords bought them in vast numbers. It was this market that led to the rise of the Spanish clones, and of China’s own indigenous copies, the best generally recognized to be those from the Shanxi Arsenal and Hanyang Munitions Works.

The original caliber would be the most popular: 7.63X25mm Mauser, known at the time as simply 7.63mm Mauser. It sent a full metal jacket bullet weighing 86 grains downrange at a then-awesome velocity of 1450 feet per second, generating 402 foot-pounds of energy at the muzzle.

Sight gradations on rear sight denoted distance settings in meters. Yes, they were optimistic…
Sight gradations on rear sight denoted distance settings in meters. Yes, they were optimistic…

They would also be produced in significant numbers in 9mm Parabellum, and in small quantities for a proprietary cartridge called the 9mm Mauser Export. This was simply the bottlenecked 7.63mm Mauser case blown out to straight-wall dimensions to take a 9mm bullet. The People’s Republic of China would eventually manufacture a clone chambered for the 7.62X25 Tokarev round. In China, the Shanxi Arsenal made oversize Mauser C96 clones chambered for the American .45 ACP cartridge, for commonality with the Thompson submachine guns that were then extremely popular in that land. Finally, Mauser briefly tried a proprietary cartridge, designated 8.15 mm, but it never got past the experimental stage.

The experimental cartridge was part of a fascinating chapter in the history of the broomhandle Mauser. After the Treaty of Versailles, ownership of firearms in military calibers was banned by the Weimar Republic. Oddly enough, 7.63mm Mauser was not considered a prohibited caliber, but 9mm Luger was. Mausers in 9mm Parabellum had to be altered to use an approved caliber, and stamped with the legend “1920,” thus creating a collectible category of C96 pistols that became known as M1920 Reworks. Most were re-barreled to 7.63mm Mauser, and some to .30 Luger, but at least one specimen – pictured here – received the “1920” stamp but remained chambered for 9mm Parabellum. (It also retained its standard 5.5-inch barrel length, despite the fact that the rule permitted nothing longer than a 4-inch barrel, which was coincidental with the introduction of the 3.9-inch Bolo Mauser.)

One of the most famous variations of this pistol is the Schnellfeuer (fast-fire), a machine pistol with fully automatic capability. Ironically, this was a case of “imitating the imitator.” It is widely believed among firearms historians that it was the Spanish clone-makers who first came up with selective-fire copies of the C96 for the Chinese market, and that Mauser introduced their version in response, even though Mauser had earlier developed full-auto models but not put them on the market. These were the Mausers with extended and removable magazines, the release button being ergonomically placed just above and ahead of the trigger guard for easy access by the shooter’s (right) trigger finger. The selector switch also seems to have been more ergonomically placed on the Mauser Schnellfeuer than on the Spanish machine pistols.

7.63mm Mauser ammo. Its relatively high velocity caused significant “secondary fragment” wound damage when the bullet hit bone.
7.63mm Mauser ammo. Its relatively high velocity caused significant “secondary fragment” wound damage when the bullet hit bone.

Within the scope of this book, there simply isn’t room to touch on all the vast number of Mauser C96 variations within a forty-year production run of a million pistols. For a short overview, the Wikipedia entry on the Mauser C96 seems complete and correct at this writing. For a deeper perspective, the reader is referred to The Broomhandle Mauser Pistol 1896-1936 by Erickson and Pate, The Mauser Self-Loading Pistol by Belford and Dunlap, and System Mauser by Breathed and Shroeder.

Shooting the C96

I know of no shooting championship ever won with the Model 96, but that was never part of its design parameters. My old and much mourned friend, the late Dean Grennell, once wrote of his personal C96, “Neither impressively accurate nor reliable in comparison to several other auto pistols, it had a most disconcerting habit of letting off two or three (shots) together, now and then.”1 The great handgun historian Geoffrey Boothroyd would write, “To modern eyes, the Mauser pistol is rather clumsy, complicated, and by no means easy to shoot without the shoulder stock attachment.

Author’s left thumb depresses a C96’s magazine follower as right hand closes the bolt on an empty chamber…an awkward procedure by today’s standards.
Author’s left thumb depresses the pistol’s magazine follower as right hand closes the bolt on an empty chamber…an awkward procedure by today’s standards.

On the other hand, it is beautifully made to an extremely high standard, and a delightful pistol to own even if only for the pleasure of dismantling and the subsequent feeling of astonishment at the ingenuity with which it has been constructed. It was also the first pistol to incorporate a feature now considered essential, a hold-open device to ensure that the breech remains open after the last cartridge has been fired.”2

The Pistol's Pedigree

For most, the C96 is a pistol of history and of fiction. Its ungainly shape and slow-to-reload mechanism had rendered it obsolete as a service handgun long before Mauser discontinued it. Movie directors loved it for its exotic, sinister looks. Frank Sinatra wielded a shoulder-stocked version in the movie “The Naked Runner,” and George Lucas and his prop crew kitted out Harrison Ford’s Han Solo character with a broomhandle Mauser reshaped into his space gun “blaster” in the Star Wars movies. This pistol is the one which fans of Sax Rohmer novels would expect the evil genius Dr. Fu Manchu to draw from beneath his silken robes.

Yet, the gun was very real. Fairbairn and Sykes, the revolutionary combat pistol trainers for the Shanghai police in the 1920s, noted that the C96 was popular with the Chinese underworld and much feared by law enforcement. Its high velocity 7.63mm bullet tended to cause hideous wounds when it struck bone and shattered it into secondary missiles coursing out of the wound path in the victim’s body.

Master self-defense instructor Tom Givens demonstrates what may be the most efficient two-handed firing hold of the shoulder-stocked Mauser pistol.
Master self-defense instructor Tom Givens demonstrates what may be the most efficient two-handed firing hold of the shoulder-stocked Mauser pistol.

In WWI, 150,000 Mauser 96s were ordered by the Imperial German Army to supplement the Luger pistol. It had become abundantly clear that, in trench warfare, a handgun was a vital tool of close-quarter survival. These guns were chambered for the 9mm Luger cartridge. To help assure that they wouldn’t be mistakenly loaded with the original 7.63 mm. Mauser ammunition, these particular C96s were produced with a huge, crimson-color numeral “9” on each side of the wooden grips. They would become known as “Red Nine Mausers,” and dubbed by some collectors the 1916 Prussian model. The German contract for the supplemental Mausers was a stark parallel to United States orders for heavy frame Colt and Smith & Wesson Model 1917 revolvers during the same period to augment the Colt 1911 semiautomatic pistol, which also couldn’t be manufactured in enough volume to outfit every combat soldier on the line.

Indeed, the German military used these guns through WWII. Almost 8,000 C96s, the M30 commercial grade, were reportedly furnished to the Luftwaffe and proofmarked by the Wehrmacht. These were produced from the early 1930s to no later than 1940.

The C96 saw extensive use in the Spanish Civil War, and was a favorite of Chinese warlords. China was so taken with these guns that they couldn’t get enough Mausers, giving rise to Spanish-made and eventually Chinese-made copies.

Many refer to the C96 as the “Bolo Mauser” as if this was as generic a nickname for it as “broomhandle.” Not so; the term “Bolo” was short for Bolshevik. After the Bolsheviks took over Russia, they ordered large quantities of a C96 variant produced from 1920 to 1921, which featured smaller grips and a handy 3.9-inch barrel. This was the true Bolo Mauser. However, when we think of famous people who used this gun in real life, one name stands out conspicuously above all others…Sir Winston Churchill.

Editor's Note: This article originally appeared in the available at GunDigestStore.com.

First Look: The Escort .22 LR Bolt-Action Rifle

0

Escort 22 LR 1

Priced right and solidly made, the Escort .22 LR has you covered whether taking aim at small game or the bullseye.

Air Rifles and shotguns—Hatsan’s catalog has always seemed bit confusing. Quite a jump between styles of firearms, with plenty of middle ground to fill in. The only logical explanation seems to be Hatsan's home base is in Turkey, and if you make guns there it’s just short of law you make a smoothbore. Though, times are changing for Hatsan’s centerfire brand Escort.

Recently, the Escort announced the addition of a bolt-action .22 LR to its catalog, simply called the .22 LR. It's the second rimfire the company has produced, following up on the Escort Rimfire Rifle from a few years back. What the new rifle lacks in a glitzy moniker it makes up for in a solid system. A bit of a throwback, the plinker is long on classy good looks and function, while staying short on price … real short. The MSRP on the Escort .22 LR is a meager $250 with a synthetic stock and $300 with a stick of walnut.

The Escort .22 LR boasts some nice features, chief among them a removable box magazine. Available in 5- and 10-round capacities, the mags have a lightweight polymer body with a stainless-steel follower. Additionally, the rifle has a threaded barrel, 1/2×28 pattern, making it compatible with nearly all .22-caliber suppressors and muzzle devices. Until you slap one on, the threads are safely protected thanks to a factory-installed cap.

Escort 22 LR 2

Other key features on the Escort .22 LR include a steel receiver coupled to a 24.8-inch barrel. Both are hard-chrome-finished to reduced corrosion and wear. Escort has provided sling swivel studs on the rifle, extra mag storage in the buttstock and an 11mm dovetail rail above the receiver for the addition of an optic. The .22 LR is also outfitted with a Picatinny accessories rail at the fore of rifle and a soft rubberized buttpad to mitigate any recoil from the mild cartridge. Additionally, the gunmaker included a bolt-mounted safety and cocked-bolt indicator on the 6.1-pound rifle.

For the price, it seems a tidy package for small-game hunting or drilling bullseyes.

22LR Specs:
Twist Rate: 1:16″
Barrel Length: 24.8″ barrel
Overall Length: 43.1″ overall length
Weight: 6.1 lbs.
MSRP: $249.99 – 22LR SYN / $299.99 – 22LR Walnut

For more information on the Escort .22 LR, please visit escortshotgunsusa.com.


More Rimfire Info:

Ruger Bisley: Battle Of .45 Colt And .44 Mag Custom Builds

1

Bisley 6

The “opposite but equal” custom Ruger Bisley build: a .44 Rem. Mag and a .45 Colt. Which one of these beautiful brutes comes out on top?

This double custom revolver build started over an ongoing (and seemingly never-ending) Internet argument between the efficacy of one cartridge—the .44 Remington Magnum—over the modern iteration of the old warhorse, the .45 Colt.

Colt fans are quick to point out the storied history of this gunslinger special and its legendary stopping power, while .44 Mag fans are nearly as fast on the draw reminding us that the .44 Magnum is the standard by which all-powerful revolver cartridges are compared, having taken virtually every big-game animal to ever walk, crawl or hobble across the land.

Both stances are true.

The centerpiece of these builds is the oversized six-shot cylinder, seen here next to a stock <a class=Gun Digest Book of Hunting Revolvers. It was an ambitious plan, with many moving parts that ultimately fell just short of completion. Nevertheless, a truncated version ended up in the book—despite my best efforts!


Gun Down More Big-Bore Revolver Info:


Head to Head: Ruger Bisley #1

Revolver #1, the stainless Ruger Bisley, actually started life as a .45 Colt that morphed into the revolver you see here. A Williams Shooters Supply dealer exclusive, we took a good thing and made it better; much better.

A Williams Shooters Supply Ruger Bisley Blackhawk was sacrificed for this custom project. It’s a stainless steel .45 Colt Blackhawk with a Bisley grip frame and 5½-inch barrel. It’s a great revolver in a great configuration, but my colleagues and I were able to make it even better.
A Williams Shooters Supply Ruger Bisley Blackhawk was sacrificed for this custom project. It’s a stainless steel .45 Colt Blackhawk with a Bisley grip frame and 5½-inch barrel. It’s a great revolver in a great configuration, but my colleagues and I were able to make it even better.

Jack Huntington was commissioned to extensively modify the revolver. The action was blocked (this reinforces the strength of the action and prevents premature wear), and the trigger was massaged to a crisp, 2-pound pull. A 5½-inch PacNor barrel with a 1:18 twist rate and barrel band was added, as well as an oversized, line-bored, six-shot cylinder (after the frame window was opened up to accommodate the large cylinder) that was heat-treated and machined from 17-4PH stainless steel.

Why not a five-shot cylinder, as is the norm in these custom builds, allowing for really warm reloads? It’s simple: There’s enough margin of safety in these big cylinders to run higher pressure loads without having to lose a round in the process. I made the decision not to turn my .45 Colt into a .454 Casull, because I have a number of .454s that can handle loads of that level. That’s not to say this revolver won’t handle higher pressures—because it most certainly will.

The base pin is by Belt Mountain. A custom front sight base holds a replaceable Freedom Arms sight blade, and a Bowen Target adjustable rear sight replaces the stock Ruger piece. The custom Bastogne walnut grips (made for my mitts) were fitted to the reshaped Bisley grip frame to round out the package. It carries well, looks great … and shoots exceedingly well.

Head to Head: Ruger Bisley #2

Revolver #2 started life as a 7½-inch, blued steel Ruger Bisley in .44 Magnum. It, too, was treated to a 5½-inch, 1:18 twist aftermarket barrel—a Krieger in this case—with a barrel band. This revolver received the same type of custom front sight base as the stainless version: the aforementioned Freedom Arms sight blade. As with its stainless counterpart, rear sight chores are aptly handled by an adjustable Target sight by Bowen Classic Arms.

The resultant revolver now sports an aftermarket 5½-inch banded barrel, a six-shot oversized cylinder and custom walnut grips. It remains a .45 Colt.
The resultant revolver now sports an aftermarket 5½-inch banded barrel, a six-shot oversized cylinder and custom walnut grips. It remains a .45 Colt.

The frame window was opened up to receive an oversized, counterbored, six-shot cylinder, held in place with a Belt Mountain oversized base pin. The action was massaged to a creep-less 2 pounds, and the Bisley grip frame was lightly reshaped (Jack removes some material that puts the shooter’s middle finger farther away from the trigger guard) and fitted with a gorgeous set of Claro walnut grips. These were made to fit my right hand.

This revolver also shoots lights-out like its stainless “brother.”

The Deciding Factor: Preference

So, which one is better? In a word: neither. It’s a matter of preference.

The end result of Jack Huntington’s makeover is this beautiful Ruger custom. It sports a 5½-inch banded barrel, six-shot oversized cylinder (remaining a .44 Mag.) and custom Claro walnut grips made by Huntington himself.
The end result of Jack Huntington’s makeover is this beautiful Ruger custom. It sports a 5½-inch banded barrel, six-shot oversized cylinder (remaining a .44 Mag.) and custom Claro walnut grips made by Huntington himself.

They both offer the same level of appeal. Some folks simply like stainless over blued steel (or vice versa). I’ve used both calibers on big game, and while they’re similar in terminal goodness, I give the slight edge to the bigger and older .45 Colt. Keep in mind that we’re not talking about your great-, great-, great-, great-grandfather’s .45 Colt, but the modern, 30,000-plus PSI iteration.

Will this debate ever be settled? It’s doubtful. In fact, what fun would that be?

Until we figure out a way to definitively assign undeniable measurements of value or virtue, the argument will rage on. Opinions are based on subjectivity; therefore, repeatability is daunting, at best.

I know that I’ll continue to own and utilize both calibers in the game fields.

Editor's Note: This article is an excerpt from Gun Digest Book of Hunting Revolvers available at GunDigestStore.com.

MUST READ ARTICLES