HomeGear & Ammo

Gear & Ammo

Latest Articles

Handloading Update: An Excerpt from the 2011 Gun Digest

With the increased prices of factory loaded ammunition, interest in handloading should also increase – and apparently it has, judging from the recent backorder situations at many manufacturers of reloading tools and components.  The equipment covered in this update doesn’t cover everything available, but it should provide an idea as to what is currently available and what’s new.

Primers: An Important Factor in Precision Reloading

The purpose of primers is to ignite the main powder charge. However, there are more considerations than mere caliber and type when looking at the ignition end of a cartridge.

Ammo: Long-Term Storage Tips

With the run on ammunition and threats from elsewhere, it pays to store your ammo right.

13 Tips for Electronic Powder Scale Accuracy

Weighing powder charges requires as much care as throwing the charge. Your powder measuring technique, no matter how careful, will be useless if you can't weigh the charge accurately. These tips will give you a head start on accurate powder weighing and save you from many of the tough lessons I learned the hard way.

Video: Powder Selection for Precision Shooting

Dave Morelli, our Precision Marksmanship columnist, describes how to select powder to achieve the best accuracy for your loads in this exclusive video.

The Basics of Selecting Reloading Powders

Modern reloading powders are divided into three basic types on the basis of their use. These are pistol, shotgun, and rifle powders. But for the beginning reloader, these are but a starting point in selecting the right powder for the desired load.

Shotshell Pressure: How to Avoid Trouble

One hears about several types of shotshell pressure, but for handloading there is only one pressure that you truly need to understand, service pressure.

Reloading Equipment for Shotgunners: Manufacturers and Gear

So you’re going to begin reloading. For $250 or perhaps even less, you can get set up with excellent new reloading equipment and buy all of the components you require to begin building your own shotshells. This article will help you get started.

Magma Engineering: How to Change a Mold in a Magma Bullet Caster

Watch this video to learn how to change a mold in a Magma Engineering Bullet Caster.

Video: Case Prep for Precision Reloading

Precision Marksmanship Columnist Dave Morelli details the tools and techniques needed to prepare cases to ensure accuracy in subsequent reloading steps.

Tooling Up For Reloading

Today's reloader generally does not have all that much spare time and usually prefers speed in production over the option of taking tools to the field. The beginning reloader is faced with some basic issues that must be assessed when it comes time to purchase equipment. This article will help you get started.

Brass Basics: Case Selection and Prep

When buying cartridge cases for reloading, the first thing you want to be sure of is that you have the right one for your gun. This article will teach you how to approach case selection, case headstamps, case cleaning and storage.

Winchester Ammunition Looking To Relocate From Its East Alton Facility

A spokesperson for the Winchester Division of the Olin Corporation recently confirmed that the company was considering moving its Centerfire ammunition manufacturing operation from its current location in East Alton, Illinois.

Precision Cartridge Length

Improve consistency and accuracy with a little experimentation and the right equipment.

Extreme Shock Ammo Introduces Affordable Allegiance Ammo Line

Extreme Shock Ammunition introduces Allegiance line as affordable ammo for popular handgun calibers.

MUST READ ARTICLES