Best AR-15 Options For Any Budget And Buyer’s Guide

• Smith & Wesson M&P 15 Sport II
• Ruger AR-556
• Core LO-Pro 15 Scout
• Del-Ton Sierra 316L
• Palmetto State Armory (PSA) PA-15
• Anderson AM-15 A4 Carbine
• Springfield Armory SAINT
• Sig Saure M400 Tread
• Bushmaster QRC II

Buyer's Guide

• AR-15: A Short History
• AR-15’s Desirability
• Breakdown Of The AR-15
• Receivers
• AR-15 Barrel
• Chambering
• Barrel Length
• Barrel Material
• Barrel Lining
• Barrel Rifling
• Types of Rifling
• Barrel Contours
• AR-15 Gas System
• Gas System Lengths
• Gas Bocks
• Bolt Carrier Group
• Barrel And Bolt Testing
• Handguards
• Buffer Tube
• AR-15 Trigger

A Short History Of The Gun

Eugene Stoner designed the AR-15 in 1956 while working at Armalite, a smaller-caliber derivative of his earlier AR-10 design. A short aside for those who don’t know, the AR designation stands for “Armalite Rifle” and nothing else. In operation the rifles are identical, just the chamberings are different. The AR-10 was chambered for 7.62x51mm (or .308 Winchester), the AR-15 5.56x45mm NATO, an evolved version of the .223 Remington based off the .222 Remington varmint cartridge. Why go small? Essentially so a soldier could carry more ammunition into battle. As far as its effectiveness, there’s no doubt the 5.56 is deadly, but it remains a hot-button debate up to this day if it's optimal.

Anyhow, Armalite eventually sold the AR-10 and AR-15 rights to the company now most associated with the designs Colt. Under the guidance of the company, the rifle came under its first military contract by 1961 and was adopted by all United States Armed Forces in 1964.

This was a slightly redesigned model that was eventually designated the M16. Incidentally, today what is known as an AR-15—no matter what the chattering class tells you—is a much different animal to the original AR-15. What was produced in the ‘50s and ’60s was a select-fire rifle, whereas the modern variation is semi-automatic. Blame the confusion on Colt marketing folks, who designated the semi-auto civilian sporter model AR-15 to capitalize off its cousin’s military cred.

Over time, the rifle evolved to meet the military’s changing needs, until the M4 Carbine design was adopted in the 1990s. Barrel and gas system length are the changes here, with a 14.5-inch barrel and a carbine-length gas system. Overall, this is the most popular pattern found in AR-15s today, though the rifle comes in every shape and size. By The Way, AR-15 technically only applies to Colt rifles—they own the rights—hence the reason you find other manufacturers calling the gun all sorts of different names, such as Palmetto State’s PA-15.

It's Desirability

There is little arguing the AR-15 is the most popular rifle of the late 20th and early 21st Century. In fact, it is the most owned rifle in America, which raises the question Why? Multiple reasons.

History: Yeah, it’s not the original military rifle, but is close enough to scratch most folks' vintage itch.
Shootability: The platform is very accurate at intermediate ranges and dang pleasurable to shoot. Most of the cartridges the rifle is chambered for are mild with little recoil.
Modularity: Next to its down-range performance this is the AR-15’s biggest selling point—you can tailor the rifle to exactly your preferences. Handguard, trigger, sights, grip, mag release, you name it and there’s an aftermarket upgrade. Bonus, most don’t require armors certification to add to a rifle.

Breakdown Of The AR-15

Getting to the rifle proper, there are numerous factors to consider when investing in an AR-15. Let’s skim over the major parts of the gun and hash out the importance of each and some specifics to look for when shopping.

Receivers

The AR-15 rifle has two receivers, the upper and lower. However, the lower carries special significance, given it is the part the Federal government technically considers the firearm. Hence the reason it is serialized. If you were to build a rifle from scratch, a very satisfying endeavor, you would require an FFL and background check to purchase even a stripped lower receiver. The upper, even a complete one—which includes all the internals, barrel and handguard—could be shipped directly to you without the need of a licensed intermediary.

The great majority of receivers are constructed from aircraft-grade aluminum alloy, usually 6061 and 7075. The numbers simply designate the type of alloy being used and sometimes include a sub-grade designation, such as “-T4” or “-T6”. These specify the temper placed on the aluminum, that is, how the alloy was heat treated.

There are two types of lower receivers billet and forged. Billet receivers are produced from a single block of aluminum that is machined into the profile of a lower. It’s a more time-consuming process, however, it yields more unique designed and integrated features. Forged receivers are made by hammering two roughly shaped halves of aluminum, then machining the profile later. This is the more affordable of the two methods, given machining is kept to a minimum.

Which is better? That’s a can of worms, given billet and forged receivers each have the advocates. Overall, forgings tend to be more durable, given the alloy’s grain structure remains intact. But billet receivers achieve tighter tolerances.

Barrel

Simple as a fire tube seems, there the AR-15 barrel is a multi-faceted topic. Let’s delve into what you’ll find when you shop for a rifle.

Chamberings

Quite simply, the chambering is what type of cartridge the rifle shoots. And the AR-15 shoots quite a few cartridges. Richard Mann has an excellent piece on AR-15 calibers if you want to survey what’s out there. However, by far the most popular chambering is 5.56x45mm NATO and accounts for nearly every option on our list below.

If this is your first endeavor into AR-style rifles, the common caliber is a solid choice. Outside of buying panics (hello 2020 and 2021), it is widely available and generally affordable. It’s also lights out at intermediate ranges, is an absolute Thor’s hammer versus varmints and is legal in many states to take deer. Also, it’ll do a number on a home invader.

While the 5.56 NATO is essentially a .223 Remington, the two are not interchangeable. Patrick Sweeney gives the nitty-gritty on the .223 vs 5.56 if you're interested in specifics. For our purposes this is what matters:

• A 5.56 NATO barrel will shoot both 5.56 and .223 Remington.
• A .223 Remington barrel will only shoot .223 Remington.
• A .223 Wylde will shoot both 5.56 and .223 Remington.

Barrel Length

While you won’t find them on a production rifle, there are 26-inch AR-15 barrels in this world. At the other end of the spectrum 4-inch options. Also everything in between. On the surface, it’s a bit of a muddle on what to choose, but law and performance help thin the field fairly quickly.

By Federal law, a rifle must have a 16-inch barrel, which can include a permanently affixed muzzle device (i.e. suppressor, muzzle brake). Go any shorter and the gun is considered a Short Barrel Rifle (SBR) and requires a tax stamp and registering it. For most, these are a hurdle not worth crossing, in turn, 16-inches is the basement. The ceiling, unless you get into custom rifles, is 20-inches on most production offerings.

As for performance between the top and bottom, it’s marginal. In general, a 20-inch rifle produces more velocity, given it has more bore, thus ensuring a more complete powder burn. But it will only beat out a 16-inch AR by roughly 150 to 200 fps at the muzzle. In many shooter’s books, it’s a marginal difference, which tends to give the shorter barrel the advantage. With the same contour, the 16-inch barrel is stiffer, thus suffers less barrel whip and is much more nimble.

However, if you aim to milk as much range from an AR-15 as possible, the 20-inch flavor might be your cup of tea. It’ll produce greater velocity, thus get the bullet where it’s going faster and narrow the window in which wind and gravity work upon it.

Barrel Material

Barrels are either made of carbon steel or stainless steel. Here are the most common of each.

Carbon Steel
4140: The most affordable steel, the alloy contains .80 to 1.10 percent chromium, .15 to .25 percent molybdenum and .40 percent carbon. The materials increase the strength and hardness above standard carbon steel.

4150: Also containing chromium and molybdenum, this steel has .50 percent carbon. The steel has higher tensile strength, however, requires a stress-relieving treatment, thus is more expensive.

Chrome-Moly Vanadium (CMV): Developed by Colt, the steel is the official mil-spec material used in the military’s M16 and M4 rifles and carbines. Essentially, it's 4150 steel with the addition of Vanadium, which significantly increases strength, hardness and stability in high temperatures.

4150 CMV, 41V50 Steel or 4150 V: Same as CMV, but the name’s been dolled up for marketing purposes.

MIL B-11595: It’s not steel, but a specifying document of the materials used in a mil-spec barrel. Some companies slang it up and use this designation for CMV barrel just to sound cool and confuse the entire world.

Stainless Steel
410: A stainless steel that includes molybdenum and is known for its durability (perhaps the best of the lot). However, it is not recommended for cold-weather duty. Below freezing, the risk of cracking is increased.

416: A highly machinable stainless steel, thus allowing for better rifling and performance. However, it is less corrosion resistant than 410. Not the top choice of the lot.

416R: A proprietary alloy from Crucible Industries, it's normal 416 stainless with molybdenum added. It machines like 416, however, has superior low-temperature performance and corrosion resistance.

17-4 PH: Known for its high strength, corrosion resistance, good mechanical properties and toughness. Precision shooters love barrels made from 17-4 PH, given the extreme uniformity and smoothness of the rifling—that and a barrel will last 3 times as long. However, the process in which its made—precipitation-hardening (PH)—makes it expensive.

Barrel Lining

Yup, there’s something in the AR-15’s bore (in many cases) besides rifling. Barrel linings are found in carbon steel barrels and improve their corrosion resistance and improve their longevity. Note, some manufacturers do not line their barrels, which isn’t a sin against God. If you’re in the market for a causal target rifle you’ll take out occasionally and care for properly, a non-lined barrel will get the job done. Harder use on the horizon, consider a barrel with this lining.

Chrome: The longest and perhaps most-used lining, Chrome reduces the effects of friction and heat on the barrel proper. Additionally, it makes cleaning much easier. This all adds life to the barrel. However, the process is known to reduce a rifle’s accuracy, though not to the extent that renders it useless. Most casual shooters won’t know the difference.

Ferritic Nitrocarburizing (FNC): Most likely you see FNC lining called something different, usually Melonite or Nitride. It’s essentially a case-hardening process that diffuses nitrogen and carbon into the steel. Thus treated a barrel can withstand direct exposure to water, heat, salt and corrosive elements better than any other process. Additionally, since it does not add material, it maintains the barrel’s accuracy.

Barrel Rifling

Manufacturers use different methods to apply the rifling to the barrel’s bore. Some methods are better for certain applications, here’s a look.

Cut Rifling: The oldest method of rifling a barrel, the process removes metal from the bore using a single-blade, hook-type cutter. Each groove is cut individually and with multiple passes, making it time-consuming and expensive. However, it introduces no additional stress to the barrel and tolerances can be kept tight.

Broach Rifling: Very similar to cut rifling, except a multi-bladed broach (metal bar) is used to cut successively deeper grooves. All the rifling is cut at once and in a single pass. This is a more affordable method with little stress placed on the barrel that has very consistent results through the entire bore. Broach rifling a barrel, relative to other methods, is still expensive.

Button Rifling: Essentially, a button of tungsten carbide with a reverse of the rifling is drawn through the bore displacing metal to lay down the pattern. It is a fairly economical system that turns out excellent results. The lands and grooves are very uniform and have a smooth finish. However, this method puts stress on the barrel that typically must be relieved afterward.

Cold Hammer Forged (CHF): A tungsten-carbide mandril is run into a roughly shaped barrel blank and the rifling is hammered into the bore. Overall, a majority of AR-15 barrels are made in this fashion and they are extremely popular with shooters. Tough as nails, these barrels withstand a lot of abuse. However, the barrels must be stress-relieved after the process and CHF doesn’t produce the uniformity of the other processes. Though, most shooters won’t notice.

Types of Rifling

This used to be cut and dry, but with the advent of 5R rifling has become a factor. What is 5R rifling, simply put the leads are opposite of the grooves and tapered. The idea behind this is to create less bullet deformation, thus maintaining ballistic integrity. Additionally, it’s supposed to be easier to clean. Traditional rifling still dominates the AR-15 market—lands opposing lands, with no taper. The jury is still out on if one outperforms the other.

Barrel Contours

Barrel contours, or barrel profiles, are simply the shape of the barrel. On the surface, a fire tube’s form might not seem like much, but it has an effect on performance and the AR-15 manageability. Thick and heavy bull barrels tend to take longer to heat up, suffer less barrel whip and maintain their harmonics better. The trade-off, their heavy and not something most folks want to hump around. Conversely, thin pencil barrels are light and make for a fairly nimble rifle, but heat up quickly and become “whippy”.

Fluting can provide an acceptable middle ground, removing material lengthwise along the barrel. This helps maintain rigidity, creates more surface area to dissipate heat and lightens an AR-15’s burden. Still not as much as other styles. Here’s a brief overview of common AR-15 barrel contours.

A1: The original pencil barrels found on the M16A1 rifle.
A2: Heavier profile forward of the gas port, found on the M16A2 rifle.
M4: Thin near the chamber, heavy just before and after the gas port, found on the M4 carbine.
Government: Same as the M4, but lacks the grenade launcher cut.
Heavy: Like it sounds, a thick bull barrel.

Gas System

The gas system power behind how the gun cycles. The gas from the conflagrated powder behind the bullet is bled off and either moves the bolt-carrier group (BCG) or a piston. Here’s a brief overview of each.

Direct Impingement (DI): This is the system that directs gas back to the receiver to move the BCG. It is extremely light and does nothing to infringe on an AR-15’s accuracy. However, it injects a good deal of carbon and fouling into the receiver, meaning the shooter must stay up on cleaning detail.

Piston: Gas forces a piston rearward which moves the BCG. While this keeps the receiver clean and is a somewhat more robust system, it does have its flaws. Pistons-driven guns are known for being less accurate, heavier and more expensive.

Gas System Lengths

The length of a gas system is determined by the distance to the gas port (where gas is bled). There are four lengths.

Pistol: 4 inches
Carbine: 7 inches
Mid-Length: 19 inches
Rifle: 12 inches

Gas Bocks

On a DI AR-15, the gas block is what diverts the gas from the barrel into the gas tube, thus back into the BCG. Most entry-level guns utilize a front sight base style gas block, in which the block is integral with the front sight. However, low-profile gas blocks, which reside under the handguard, are becoming more common.

Bolt Carrier Group

The bolt carrier group is where a lot of the action happens in the rifle’s operation. The component loads the fresh round, fires it and ejects the spent case. Essentially it’s made up of four main components.

Bolt: The rotating bolt locks the chamber for firing, as well as strips a fresh round off the magazine. It also has an extractor, whose job is to pull the spent case out and eject it from the receiver. Bolts are typically made of one of three kinds of steel, Carpenter No. 158, 860 or 9310.
Carrier: The heart of the BCG, it houses all the other components and does all the heavy lifting. It deals with a ton of force and thus must be well made from tough material, the same kinds of steel as the bolt.
Gas Key: The small cupped device at the top of the BCG. It catches the diverted gas to thrust the BCG rearward, thus cycling the rifle.
Gas Rings: Traps the expanding gas, allowing it to operate the bolt.
Cam Pin: Stops the bolt from over-rotating when unlocking and keeps the cam pin, bolt, and firing pin rotating and moving as one unit.
Firing Pin: Strikes the primer to initiate the firing process.

Barrel And Bolt Testing

Most manufacturers give a damn about the quality of their products, thus test them for imperfections. There are two main tests Magnetic Particle (MP) and High Pressure (HP). Each is designed to detect any cracks or flaws in barrels and bolts, each component should be stamped with the acronyms if they’ve gone through the procedures.

Handguards

More the preventing you from singing your hand, many handguards serve as an accessory attachment point. Two of the most popular systems to this end are M-Lok and Keymod—the former more prevalent. As to the types of handguards, there are two main varieties: free-floated and non-free-floated. As the name suggests, it is all determined by if the handguard makes physical contact with the barrel. Free-floated handguards a preferred as they enhance the accuracy potential of a rifle. But non-free-floated will get the job done without knocking a gun too far off-kilter.

Buffer Tube

This is the protrusion on the rear of an AR-15, where the buttstock attaches. It housed the buffer spring and weight, whose jobs are to slow the rearward path of the BCG and return it forward.

Triggers

Next to the AR-15’s performance, modularity is perhaps the gun’s greatest attraction. From buttstock to front sight post, there isn’t a facet of the rifle that can’t be fiddled to perfection. Needless to say, your options are legion and far too vast to cover here. Instead, we’ll zero in on one feature of the gun you should consider at the top of your AR-15 upgrade list—its trigger.

---

Get On Target With The AR:

• Go Small With These 8 Economical AR Pistol Options
• 8 Budget AR-15 Options: More Bang For The Buck
• AR-10 vs. AR-15: How Stoner’s Rifles Stack Up
• How It Works: The AR Upper

---

By and large, what is known as a mil-spec trigger is a nasty beast. It’ll get your gun to go BANG!, but it won’t do much to enhance its performance. As you progress as a shooter, you’ll find those crunchy, gritty, squishy triggers detract from your accuracy potential. Thankfully, putting a better bang switch into your rifle is among the simplest upgrades and for the money one of the best values. With that in mind, it’s wise to factor an extra $100 to $200 into the base price for an upgraded AR-15 trigger. Yeah, it ups your investment, but you won’t find it a waste of money by any stretch.

Geissele AR Trigger Kit $240 Primary Arms Geissele AR Trigger Kit $174.99 Brownells.com