The Kimber SIS is one of the best looking .45 automatics on the planet and proof that looks don’t have to be only skin deep. The pistol is also a great shooter.
The Kimber SIS is one of the best looking .45 automatics on the planet and proof that looks don’t have to be only skin deep. The pistol is also a great shooter.

Semi-automatics, on the other hand, can be very sensitive when it comes to ammunition. A different bullet shape may alter feeding characteristics or a different powder charge may slow down or speed up the slide, thus producing anything from a “stovepipe” on the way out to a feeding jam on the way in. It is important that the ammunition which will be in the weapon when it is carried is the ammunition with which you do at least some of your practice. If, let’s say, you can get some really inexpensive ammo and you want to burn it up for practice, fine.

Just make certain that you have run enough ammo through your semi-auto of the type that will be carried on the street. The popular wisdom – and I wouldn’t dispute it – is that a minimum of two hundred failure-free rounds should be put through the weapon before carrying the weapon for defense.

A removable magazine, erroneously called a “clip” by some, even some who know better, is the ammunition delivery system for a semi-automatic pistol. They are called “automatics” because they “automatically” load the next round into the chamber in the barrel until the supply in the magazine is exhausted.
A removable magazine, erroneously called a “clip” by some, even some who know better, is the ammunition delivery system for a semi-automatic pistol. They are called “automatics” because they “automatically” load the next round into the chamber in the barrel until the supply in the magazine is exhausted.

In brief, if you are a gun knowledgeable person of satisfactory adult strength, either a revolver or a semi-auto will get you through.

The final question is, however, which type is more easily concealed? Because the semi-auto is flatter and the grip doesn’t flare outward, the semi-auto wins over all revolvers except the five-shot snubby .38. Full size revolvers are rarely concealed at waist level, these days; if carried concealed at all, they are more likely going to be worn in a diagonal shoulder holster. Full-size semi-autos, on the other hand, are worn concealed at waist level by droves of concealed weapons carriers.

Earlier in this chapter, we compared the two-inch J-frame with five shots to the Detonics CombatMaster with six or seven rounds. Comparing my old six-shooter version of the Smith & Wesson Model 686 .357 Magnum to a full-size 1911 with seven round magazine plus one in the chamber, we see that both handguns are a nominal 8.75 inches long, the 686 revolver 5 inches in height while the 1911 runs about 5.25 inches. The 686, measured at the cylinder (the widest part of the revolver), goes 1.5 inches. The 1911, measured at the ejection port, is under 7/8 of an inch wide. The 686’s barrel is only 4 inches long and the 1911’s barrel is 5 inches in length.

I like a good revolver as much as the next guy – and maybe more. But in a package not much over half as wide as a revolver, I can have two more rounds, reload lots faster and still have an extra inch of barrel for enhanced cartridge performance and accuracy, all while being able to hide the gun on body more easily and more comfortably. If I shift to the slightly fatter large capacity semi-auto, regardless of manufacturer, I can have twice as many rounds as even the more modern seven-shooter revolvers.

If I were to compare capacities between a six-shot revolver loaded with light .357s or moderate .38 Specials and an ordinary Glock 17 9mm with the best possible ammo choice, the Glock would have three times the capacity and, depending on loads chosen, not identical but comparable useful oomph on the target. The facts speak for themselves.

This article is an excerpt from the book Armed for Personal Defense. Click Here to get your copy.

We recommend these concealed carry resources:
New! Gun Digest Buyer’s Guide to Concealed Carry Pistols

The Gun Digest Book of Concealed Carry

The Gun Digest Book of Combat Handgunnery

Effective Handgun Defense, A Comprehensive Guide to Concealed Carry

Find more resources at



  1. Mr. Ahern,

    I realize you were president of Detonics USA for a few years, that you’ve written many books and articles regarding firearms but I had issues with this article you wrote for Gun Digest.

    In “CCW: Revolver or Autoloader?” you wrote:
    “The semi-automatic has the following features … better accuracy in average hands … and enhanced reliability when neglected or subjected to dirt.”
    Please explain how an autoloader’s reliability is enhanced when neglected or subjected to dirt. I read your opening statement several times and I understand your writing style, maybe this is a typo by the editors? Or perhaps the word “reliability” should’ve been “unreliability”? True the original Colt 1911a1 made its reputation during both world wars by being completely reliable while caked with mud, dust, dirt, grit, sand, due to its loose tolerances (remember the AK47’s legendary status and loose tolerances?) but todays tight tolerances in autoloaders makes them less reliable when neglected or subjected to dirt. There are exceptions but by and large they fail when they get dirt in them. If you shake a pistol or revolver and you don’t hear clicking/clacking, then it will jam when dirty at the most inopportune moment.

    Also, I’m sure from my experience that accuracy is not better in average hands when talking about autoloaders since autoloader slide recoil causes excessive muzzle rise whereas in a revolver there is only felt recoil of the round going off and not a hunk of metal (re: the slide) slamming back off the direct line of fire (off center as it were) above the hand causing the “average hand’s” wrist to bend excessively; even small autoloaders such as the PPK or Ruger LCR or even your beloved large cal. Detonics CombatMaster (Officer’s model in size) don’t fit “average hands” as the pinky finger is usually off the grip completely leaving the shooter to have less control over felt recoil when firing, not to mention getting “bitten” by the slide because the shooter handling a small frame autoloader is want to “choke” the grip and get the web of his firing hand up to high, this is typical for the inexperienced PPK shooter, I’ve seen where people have gotten their hands cut clean to the bone when “choking” a PPK’s very small grip.

    You then wrote:
    “Looking first at the revolver … watch-like mechanisms in their operation…” but later in your article you state the near legendary reliability of revolvers. Revolvers have been in production since the 1800’s and their reliability is pretty much 100% these days. Sure, you can cake any firearm with enough mud, dirt, water, dust, and sand, then run over it with a tank and NO, it won’t be 100% reliable. But making the statement about a watch-like mechanism portrays the revolver as something delicate and must be handled with extreme care and as you know, nothing could be further from the truth. An inexperienced shooter with a lightweight five shot revolver can almost be guaranteed 100% flawless function of that gun, the only variable that could bring that percentage down is faulty ammo.

    Further on you wrote:
    “the cylinder’s charging holes.”
    I think these are called “chambers” in a cylinder, not “charging holes” in the cylinder.
    I realize your article (an excerpt from you book) is for what seems the inexperienced or the uninitiated when it comes to handguns, I think clarity would go a long way here.

    Next you wrote:
    “I’m a fan of the Detonics CombatMaster … which is a .45 capable of six rounds in the magazine and one round in the chamber (I only carry 5+1, stripping the top round from the magazine into the chamber…”
    Since your article is clearly for the uninitiated or inexperience shooter, why would you “strip” one round from the mag into the chamber leaving 5 in the mag? What is the safety/defensive reason for this? Why limit yourself that one round, one round that could save your life or that of a loved one? I hope it has nothing to do with the Old West practice of placing the hammer down on an empty cylinder (half cocked) leaving only five rounds in the cylinder and if it is, this makes no sense. I carry my .45 with 8 rounds in the mag (Commander or Govn’t model, take you pick) and one up the pipe, nine rounds total. If I’m broke down on the turnpike, I’d rather have 9 rounds than your six.

    You have a photo of partially ejected shells hanging out of a revolver’s cylinder with the following caption:
    “A partial reload of a revolver can be accomplished by working the ejector rod only part way, so spent cases can be plucked out and replaced by hand or from a Bianchi Speedstrip.”
    Since this entire article is about CCW and not spending an hour at the range, I’d wonder why anyone would even consider “plucking” six rounds individually from a cylinder when the ejector rod is RIGHT THERE to eject all six empty shells so you can “speed load” the next six rounds with a speedloader. I know some folks like the “speed strip” though when it comes to a linear speed strip being force to load one or two rounds at a time into a round cylinder makes a much sense as forcing a square peg into a round hole. Circluar or half moon and star speedloaders are the only way to go with a modern CCW revolver.

    “my Walther PP .32 ACP… as a .380”
    As a CCW firearm, I carried a Beretta 84f in .380 for years until I went to a little competition shooting bowling pins, when hit with .380 the bowling pins weebled and wobbled but they didn’t fall down, but other guys shooting .45 sent them flying, I no longer carry .380, I’m a “.45 man” now.

    You wrote:
    ‘What about accuracy?”
    When it comes to short barreled revolvers or Officer’s model .45’s… my philosophy is any firearm is better than no firearm when it comes to fighting for your life. A short barrel revolver or pistol, in my opinion, basically throws out a chunk of lead at high velocity at your intended assailant. A friend of mine who worked for an alphabet agency said in a CCW situation, average contact range is 3 to 7 feet, at that range accuracy goes to Hell, at that range you’re fighting for you life, at that range all you want is to punch a hole or holes into your assailant so you can live another day. If you want long-range accuracy, get a Les Baer .45 with Novack Adjustable sights so you can adjust for windage and elevation, then again, them big sights WILL get hung up in your clothing when carrying concealed and who has time to adjust for windage in a life or death CCW situation?

    Later on you wrote:
    “Defensive shooting from concealment can take place at contact distance and, despite those who claim one must always – ALWAYS – look across the sights when shooting, in self-defense scenarios there just sometimes isn’t the time or the distance. The wise concealed weapons carrier will learn the skills needed for hip level point shooting at seriously close range.”
    True but literally shooting from the hip with a revolver can be done easily, but with an autoloader shot at hip level, FTF and FTE can occur because of bending your wrist to aim your autoloader downrange (it’s called limp wristing the gun) causing it to not function properly due to lack of a stable platform (limp wrist at the hip with wrist bent to point gun from the hip) which causes it to Fail to Fire due to feed jam or Fail to Eject due to bent or “limp” wrist. I agree with you about shooting from the hip at very close contact range but this type of practice should be done with a professional keeping an eye you don’t shoot yourself in the hip, kidney, or thigh.

    Finally you stated:
    “I am no terrific marksman and have never claimed otherwise. That said, what has always seemed practical to me has been this: Be prepared to shoot from the instant the weapon has cleared the holster and all the while you are raising the gun to eye level and firmly seating it with the support hand.”
    If I read this correctly you’re stating that as soon as the firearm clears your holster (the barrel pointed downrange) you should start pulling the trigger and keep firing as you raise the pistol/revolver to eye level, or did I misunderstand you? Basically you described what is what Old West speed shooters do, as soon as the barrel clears the holster, send lead down range. This flies in the face of all basic rules of shooting where knowing that your “background” is as important, if not more important, than your intended target; imagine describing to a jury how you were defending yourself, shooting from the hip, and you nailed some baby in a stroller (in the background) who happened to be yards behind your assailant.

    Nothing was mentioned about revolvers/pistols being deburred so that they don’t get hung up on clothing during presentation of the firearm and you even talk about cocking the hammer on a revolver when you should’ve said a hammerless revolver is the preferred type revolver when carrying concealed since a hammer spur WILL get hung up in one’s clothing. You talked about solid steel revolvers whereas new revolvers are available that are much lighter in weight and can take .38 +P rounds or .357 with a two inch barrel; the Ruger LCR is a perfect example of this and though felt recoil is greater due to it’s monolithic aluminum frame and polymer components (steel barrel and stainless steel cylinder) this firearm is so lightweight any man or woman can carry it and almost forget they’re even carrying!

    I know it appears I’m ripping your article apart but there were a lot of things about it I found fault with and the readers of this site, who may be the uninitiated or inexperience, readers you aimed your article at, need to know more specifics. Hopefully these are covered in more detail in your book(s) but if not, maybe my words here will provoke further investigation on their part before they purchase a firearm for CCW.

    NRA Certified Pistol Instructor

  2. Oh yeah, forget to mention how I carry my weapons. My preferred choice is an inside the waistband clip on holster. The LCP and BLACK WIDOW often carried in jacket or vest, inside the breast pocket. The 460V goes in a shoulder holster or across the chest (under a jacket or vest). The M&P 9 or Full Size 1911 goes in a belt mount slide adjustable holster; sometimes cross draw worn or in back as well.

  3. Own a variety of both types of weapons. Small size to large as well. As a daily carry weapon it’s a 3″ barrel or less semi auto, in 40S&W or 45ACP. We’re are talking a min. of 5 +1 and max. of 8 + 1 in the chamber, depending on which brand I choose. I usually carry a spare loaded magazine as well. If I want to do something different for a change, I will carry my S&W 632, the .327 Mag., J frame 6 rounds and power akin to a .357. When I go off hiking I often carry a back up weapon as well. Most often this will be my Bond Arms Snake Slayer with 4.25″ barrel 45LC/.410 3″ and I load it with 300g Bear load 45LC or 3″ .410 000 buck. Usually carry a pouch with spare 45LC 225g FTX and some .410 #4 Buck and #4 shot. When I go off into the remote wilderness I pack my S&W 460V with some 300g or better loads as well as 200g FTX. For additional back up in public settings, I carry an LCP380 or NAA Black Widow 22WMR with 45g FTX or 30g VMAX by Hornady, both very accurate to 10 yards with a 2″ barrel. Aside from my personal choices, revolvers really are simple to keep functioning flawlessly and rarely is there a malfunction. The only one I can recall are due to loads that are over spec. and get stuck in the cylinder upon ejection attempt. I have never shot anything but factory loads and have experienced pretty stuck cartridges. Required a palm smack on the ejection rod and once against a harder service to get them out. It’s most always the same brand that has issues; a well known old west brand name. Yes, it is important to fire plenty of the ammo type you plan to carry, no matter what style gun you choose to carry. Every gun being different, means you might have more than one brand and type you need to keep on hand in sufficient quantity. My semi-autos of choice; Kahr MK40, SA EMP40 and Kimber SIS Ultra. For high capacity carry, pull out the old standby S&W M&P 9 with 17 +1.

  4. I have carried both a revolver and a S&W 45acp. I prefer my 45 to the revolver. I used to own a 38 detective special S&W. I prefer the semi-auto45 because the detective special revolver had a habit of hanging up in my pants pocket when it go to the cylinder. My 45’s don’t give me this problem they are the same width all the way down so in tight fitting jeans it does not hang up.

  5. Hi Jerry, I remember meeting you years ago at the Great Western show in Southern Cal. You were with the SWPL, right? I used to work with Jim Hoag’s .45 shop.

    I’d agree with your assessment between the two action types. If one simply does not want to take the time to learn a semi auto, or is somewhat infirm, has R.A., or doesn’t wish to be “inconvenienced” by his sidearm, the snub makes sense.

    Otherwise, the greater capacity and ease of shooting the semi, especially the 1911 we both admire, makes the revolver a choice for hunters only in large calibers. As a piece of social hardware, the auto pretty much rules the roost because of its simplicity of action, greater ammo load, adequate if not outstanding accuracy, and less recoil for equivalent street results.

    I’ve never been able to master the 2″ snub shooting DA; they are the ONLY handguns that have vexed me so. My “snub” is a G30 in .45ACP.

    Keep the Faith!


  6. Good points on the wheel guns vs semis. You can look at it like this, compare automatic transmissions (wheel guns) to a standard transmission (semis). About anyone can drive the automatic but you have to learn and practice awhile to drive the standard. In other words if you can’t or won’t put in the time and effort to master a semi-auto and learn how to quickly deal with the occasional malfunction prone to them then you NEED to buy a wheel gun. Despite the difference in concealing one more easily than the other, being able to get on target quickly and firing the weapon properly should be the main objective. Five or six well placed rounds from a revolver can do as much or more damage than someone with a Glock-17 DUMPING the mag at a target just because they know they have the extra firepower. Having a hi-cap semi-auto should never be an excuse for sloppy shooting. On the other side of the coin though, I carry a Glock-30 with the ten round mag for concealment and I carry two Glock-21 mags with grip extensions in the mag pouch, that gives me 37 available rounds counting the one in the chamber. Sounding a little hypocritical here but I do put in a lot of range time with the Glocks (got a G-26 also that uses G-17 mags as well). If you’ve got the time to work with the semis then by all means carry one but if you’re like so many out there that buy one gun and one box of ammo for home defense or CC I sure hope you bought a good D.A. revolver.