Gun Digest
 

Best AR-15 Accessories And Upgrades (2023)

At GunDigest, we independently review products. However, we may earn a commission when you purchase through links on our site. Learn More

Updated 04/21/2023

Dos and Don’ts when it comes to AR-15 accessories, upgrades and parts in general.

What AR-15 Accessories and Upgrades Should You Focus On:

You should be aware that the AR-15 is an incredibly popular rifle platform in America, and for good reason. Relatively inexpensive, light recoiling, reliable and easily adaptable to a particular role are all huge factors in why it’s grown to be crowned as “America’s Rifle.”

Have a plan when you start buying AR-15 accessories and parts; a simple rifle doesn’t mean less capable.

And if I may be completely frank, those are the same reasons that we have a sea of subpar AR-15 accessories and parts all over the market. Experience and several hours of exhaustive research on Facebook tell me that the carbine is misunderstood by a huge number of AR owners.

So, before you jump on AliExpress and order all of the Chinesium “upgrades” you can find, this is where I would start to get the most out of my rifle—and get the most from my money when considering upgrades.

The AR-15: Not LEGOs

It’s easy to think that building an AR-15 is just like snapping together some LEGOs … but you couldn’t be more mistaken. It wasn’t until I had the good fortune to attend an armorer’s course from William Larson, the AR-15 Yoda himself, that the number of out-of-spec AR parts on the market sunk in.

One of the sayings that Will was fond of is, “AR-15s aren’t LEGOs because LEGOs have a spec.” Armed with new knowledge, I started to pay closer attention to aftermarket AR15 accessories and parts than I ever had before. And as you might expect from Yoda, Will hit the nail on the head.

The ultra-strong Magpul UBR Gen2 is a perfect companion for the Vltor A5 system.

The truth is that most of the ARs on the market—and the majority of aftermarket parts—labeled as mil-spec … well, they aren’t. On the civilian market, that dirty little term “mil-spec” means that the part is sized to fit the wide range of specifications found on commercial AR-15s, not that it meets the standards outlined in the actual technical document that outlines the real mil-spec.

Just because that bargain-priced part says it’ll fit doesn’t mean it will. You might have to rely on time-tested gunsmith techniques—such as holding your tongue just right between your lips, a large hammer or even a Dremel tool.

If you prefer sparing yourself the guessing game, stick to high-quality parts; you might not need to rely on the Dremel after all.

Have A Plan

The saying “Jack of all trades, master of none” is just as applicable to rifles as it is people. The “one rifle to rule them all” simply doesn’t exist. Every rifle has specific weaknesses and strengths based on how the rifle is spec’d out from the factory, plus whatever changes are made to it after purchase.

An 18- to 20-inch barrel rifle might be perfect for some hunting, Cold War engagement distances or use in a DMR role. Will it work in a CQB role while defending your home? Sure—but it isn’t going to be ideal.

An 18-inch DMR rifle would make a less-than-ideal home-defense rifle, but it’s great at distance.

Similarly, I recommend that you don’t choose a 10.5-inch 5.56 NATO SBR or pistol to compete in a Precision Rifle match. That MK18/CQBR-inspired gun is far more at home in the tight confines of a structure, such as your home.

Whatever role you have for your rifle, make sure you follow local and federal laws. Yes, many can be considered unconstitutional, but failing to do so could land you in much more trouble than you’re interested in handling.

It Isn’t ‘Just As Good’

I’m not going to shame anyone for the Zombie Slayer 9000 that was built to kick-start their second career as a “gunfluencer” by propelling an online social account to legendary status. The truth is that rifle is probably as functional—if not more functional—than the GM Hydramatic M16A1 clone hanging on my wall.

Cool-looking guns are cool, and there isn’t anything wrong with that until you start believing that the Zombie Slayer 9000 is “just as good” as a proven rifle from Sons of Liberty Gun Works, Sionics, Geissele, Knights Armament, FN America and a pile of other AR manufacturers with guns that are proven reliable.

M-Lok has become the new standard for attaching AR-15 accessories; a 1913 rail is still serviceable, but avoid KeyMod at all costs.

The same thing applies to knock-off parts that are priced significantly below the cost of the original one. Better materials, more research and development, innovative design and better quality control are going to play a factor in price, making the original version likely more expensive.

Instead of blindly cutting corners with part quality, think hard about the part you intend to save a few bucks on … and then think about how badly you might get hurt if that part blew up during a catastrophic failure. Buy the quality; it’s always worth it.


Get On Target With The AR:


AR-15 Accessories And Parts Suggestions

Sling: A Must-have AR-15 Accessory

A sling is essential, maybe the most important AR-15 accessory. Period. It can be used to carry a rifle, provide more stability when lining up a shot, and retain your rifle should someone try to grab it away from you.

Blue Force Gear Vickers Sling

The single-point sling is easier to use in cramped spaces due to the amount of movement they offer, but that’s also the weakness of the single-point design. When the rifle is slung, it swings all over the place, hitting your knees, shins and everything else in its path.

There are a bunch of well-made examples of single-point slings, but if you’re determined to buy one, get a Magpul MS3 or MS4 sling that can be converted to a two-point easily.

Preferably, choose a quick-adjust two-point sling, which offers more stability when carrying the rifle and shooting it than a single point will. The two-point sling also excels when carrying the rifle slung in front, side or back.

Models to consider are the Blue Force Gear Vickers Sling, the SOB B-Sling, and other similarly built models. Pick a high-quality design and you won’t be disappointed.

Step Up Your Optics Game

We live in the future with the entire internet in our pocket, and adding a red-dot or low-powered variable optic (LPVO) to your rifle reliably enhances your ability to aim the rifle.

LPVO technology is to the point that shooters who’ve acclimated to the more versatile optic are about as fast as the folks using a red-dot. Not only is most of the speed you get from a dot available, but there are also 10x scopes—like the Vortex Razor HD Gen III 1-10x—that you can crank up when precision is needed.

If the minimum buy-in for a high-quality LPVO of $1,000 is a bit steep, a good red-dot might be the ticket. Among Holosun, Aimpoint, Sig Electro-Optics and EOTech, there’s a dot that fits your needs. However, beware of the bargain dots: The market is flooded with cheap sights that will die or lose zero at the worst times.

Also, don’t forget a high-quality mount for your new optic to ensure you don’t move the optic should you bump it on something. Not all rings and bases are created equal, either. Not even close.

Floppy Barrel Fix

Did you know that when you apply pressure to your plastic clamshell handguards by leaning into a bipod that it actually changes your point of impact?

A free-float rail nearly removes that deviation and also gives you somewhere to attach lights, lasers, sling mounts and index points, such as a Gripstop. Look for a high-quality Picatinny rail model or preferably, something with M-Lok slots. Avoid KeyMod since it isn’t heavily supported anymore. M-Lok is the clear winner in that popularity contest.

Any high-quality brand should do you well, but there’s a handful of proven performers: Geissele, Sons of Liberty Gun Works, Hodge Defense, Bravo Company and Knight’s Armament. Cover the full length of the barrel, but don’t extend over the muzzle.

Triggered

You don’t really need to upgrade your trigger, the standard mil-spec style trigger that’s found in most rifles will be perfectly adequate for most shooters. However, upgrading a mil-spec trigger almost always offers immediate performance improvements.

Should you decide that you want to upgrade the trigger on your rifle, I suggest that you look for a trigger that isn’t housed in a drop-in cassette. It’s possible that this design can trap debris in the trigger mechanism, leading to a malfunction.

A good old Geissele not only provides a snappy break but also is easy to maintenance.

Geissele made their name with their triggers, and for good reason. Regardless of the role you have identified for your rifle, Geissele has a trigger that’ll work for you. There’s a budget-friendly option—the ALG Defense Advanced Combat Trigger—if the regular Geissele line is more money than you’d like invest.

New Furniture Livens The Place Up

An A2 grip and M4 stock will do just fine in a pinch, but those are often among the first things that get ditched on a new rifle. Sadly, the M4-style stock is missing a QD attachment point for a sling, which is a good enough reason for me to chuck the stock one into the recycler. As for the grip, many aren’t fond of the “bump” between the middle and ring finger placement … and they ditch that as well.

Magpul UBR Gen2 Stock

There are a ton of great grips out there: Which one you choose really depends on the role of the gun. The Magpul series of grips that accept an insert are a solid option because you can stow some extra oil, some Skittles or even a spare bolt and firing pin with one of the available inserts.

What stock you choose is equally dependent on the gun’s purpose. If you have a dedicated precision-focused rifle, you might choose the Magpul PRS stock or B5 Systems Precision Stock. A general carbine might be better off with something a bit less expensive yet still offering a wide range of adjustability.

Folding Stock

While a LAW Tactical folding stock adapter might not strike you as a common-sense upgrade, it really is. A LAW folder isn’t a must on every AR-15, but it’s a useful addition to rifles or pistols that you might want to carry discretely.

The ability to chop the buffer tube and stock off your rifle for storage and transportation opens up a bunch of possibilities in terms of rifle bags, in addition to where you’re able to stow that bag. Pair a LAW folder and a discrete rifle bag from Tuff Products, and those awkward moments in the hotel elevator while attending an out-of-town training class or match are in the past.

While a folding AR-15 might seem unnecessary, the robust LAW Tactical folder is a must-have on many of the author’s rifles.

Be cautious of knock-off folding stock adapters or ones that copy the design of LAW Tactical that are made from inferior metals. You might save a hundred bucks or so at the cost of replacing durable steel construction with substantially weaker 6000 series aluminum. Personally, I don’t like the idea of my face being close to a reciprocating bolt and bolt extension that passes through a joint that needs to be precisely aligned, only to be housed in “good enough” materials.

AR-15 Accessories: It Can Be Like LEGOs

The AR platform is nothing short of amazing. It checks just about every box that you can think of and, if it missed one, just change the rifle so it checks all the boxes for you.

Even though the commercial model AR-15s doesn’t have a spec now, maybe one day manufacturers can settle on some standards.

If that happens, AR-15s might actually be like LEGOs.

Editor's Note: This article originally appeared in the 2020 December issue of Gun Digest the Magazine.

Next Step: Get your FREE Printable Target Pack

Enhance your shooting precision with our 62 MOA Targets, perfect for rifles and handguns. Crafted in collaboration with Storm Tactical for accuracy and versatility.

Subscribe to the Gun Digest email newsletter and get your downloadable target pack sent straight to your inbox. Stay updated with the latest firearms info in the industry.

Get Free Targets




Exit mobile version