Sighting Equipment

Because my Unertl wouldn’t work. I snapped up a B&L 6–24x scope when it was offered at an attractive price. It does add to the weight and bulk of the rifle no little bit, but then this isn’t a rifle anyone would want to carry in the field for any great distance.

This B&L variable is a great work of art, and optically won’t take a backseat to anything, but there is room for improvement, mainly in the method of adjusting parallax. The Parallax Adjustment Selector Ring, as B&L calls it, moves the objective (front) lens elements back and forth. The higher the power setting the more precise this adjustment must be. If one makes an adjustment at low power and the scope is then zoomed to high power it will be out of focus, so always adjust for parallax at the maximum power setting you intend using.

The variable-power aspects of this B&L scope give it advantages over fixed power scopes. You can, for example, seemingly dial away mirage by lowering the power setting. The mirage is still there but it isn’t as noticeable. The glass can also be used as a spotting scope.


Before the rifle arrived several different makes and weights of 6mm bullets were ordered, along with 100 unprimed cases, 40 factory loads with 100-gr. bullets, and a set of RCBS neck sizing dies. In a rifle mainly to be used for target work there isn’t much sense in getting a full length sizing die. Resizing is also easier, as only the neck is worked. As of now some cases have been reloaded 20 times and still slip easily into the chamber.

The unprimed cases were first trimmed lightly on a Forster trimmer to make the mouths smooth and even — most looked as if they had been factory trimmed with a dull hacksaw, one with several teeth missing! This seems to be a common situation with all makes of primed and unprimed brass, not an exception. All cases were chamfered, then primed with Remington large rifle primers. Alcan primers were also used later, but my shooting could detect no difference between the two, which speaks rather highly for a newcomer to the rifle and pistol primer field.

All loads were assembled on a Hollywood Senior Turret Tool, a product I can’t praise enough. Workmanship is top notch, as it is on all Hollywood tools, something that seems to be disappearing from the American scene. A Hollywood micrometer powder measure was also used throughout, and it performed without a hitch. No loads were weighed, though the measure was first set using the big Ohaus scales, a fine machine but rather too large and bulky to take afield.

This article is an excerpt from the new Greatest Guns of Gun Digest book. Click here to get your copy.