Gun Digest

.338 Lapua Mag: The Ultimate Long-Range Round?

The .338 Lapua Mag. dates to 1983, when Research Armament Industries, in the U.S., outlined plans for a sniper cartridge driving a 250-grain .338 bullet at 3,000 fps. The sleek FMJ missile would penetrate five layers of body armor at 1,000 meters (1,094 yards).

RAI chose the Rigby case, for its modern rimless design and great capacity. But the .416 was born in a gentler time and configured for a maximum pressure of 47,137 psi.

The .338 Lapua (left) has a big advantage downrange over the .300 Winchester and .30-06.
The .338 Lapua (left) has a big advantage downrange over the .300 Winchester and .30-06.

The new .338 would exceed that limit. To guard against unacceptable case stretching and possible separation, the Rigby’s hull would get a thicker, harder web. RAI contacted BELL (Bell Extrusion Laboratories) of Bensenville, Illinois, to make the brass.

Alas, the first batch didn’t meet specs. In 1984, after building a test rifle and procuring bullets from Hornady, RAI looked to Lapua for help in pushing the project forward. Shortly thereafter, financial difficulties forced RAI out. The .338-416 project was officially cancelled.

Lapua found it worth pursuing. Partnering with Accuracy International, a young British firm, Lapua changed the dimensions and composition of the Rigby hull to brook pressures exceeding 60,000 psi.

Not only was the web thicker, brass hardness was engineered in a gradient from hard to soft, base to mouth. Lapua designed a 250-grain FMJ bullet, designating it the “LockBase B408.”

The .338 Norma (left) and parent Lapua are champs at four-digit yardages. Snipers agree!

The .338 Lapua was registered, in 1989, with the CIP (Commission Internationale Permanente pour l’Epreuve des Armes a Feu Portatives). Europe’s CIP is the equivalent of SAAMI (Sporting Arms and Ammunition Manufacturers Institute), in the U.S. Both organizations provide manufacturing standards for the firearms industry.

Data for the .338 Lapua specifies a maximum pressure of 60,916 psi (piezo measure). During its development, the 300-grain Sierra MatchKing was not yet in production.

Lapua’s 250-grain LockBase VLD bullet, and the 250 Scenar, met the 3,000-fps target, generating about 4,890 ft-lbs at the muzzle. A hunting load hurling a 250-grain Nosler Partition clocked 2,940 fps. Current loads with 300-grain Sierra MatchKings exit at 2,710 fps. Lapua’s 300-grain Scenars reach 2,750 fps, carry 5,000 ft-lbs.

Related Video:

NEXT STEP: Download Your Free Storm Tactical Printable Target Pack

62 Printable MOA Targets with DOT Drills - Rifle Range in YARDS This impressive target pack from our friends at Storm Tactical contains 62 printable targets for rifle and handgun range use. Target grids and bullseye sizes are in MOA. Ideal for long-range shooting! Get Free Targets




Exit mobile version