Gun Digest

The Impressive Rise Of The Fat-Bolt Rifle

A new wind blowing across the sporting rifle landscape is delivering a dominating combination of affordability and accuracy — the rise of the fat-bolt rifle.

What are the fat-bolt rifle's benefits compared to traditional twin-lug bolt guns?

Unless you’ve been living on another planet, you probably know that the age of the twin lug '98 Mauser-type bolt-action rifle is history. Now, there is no question that the twin-lug action has had a helluva run these past 120 years — we’ve only to look at the popularity of the Remington 700, Savage 100 series, Winchester Model 70, Ruger M77 or Mossberg Patriot to prove it.

But if starting with a clean sheet of paper, I’m saying that no established or start-up rifle manufacturer is likely to come out with a Mauser-type action because there are simply better and more efficient ways to produce a rifle. As always, there are and will be exceptions — Barrett’s recent introduction of its Fieldcraft rifle is a good example, it being a Remington 700 clone. But like I said, generally speaking, the days of the twin-lug action are over when it comes to new rifle introductions.

From left to right is the 9-lug Weatherby, the 6-lug Roessler Titan 6 and the 3-lug Ruger American, tri-lug actions all because the lugs are all oriented on 120-degree centers rather than being twin-opposed as on a Mauser-type action.

So what growing trend is it that’s relegating the twin-lug bolt action to the dustbin of history? That’s easy; it’s the tri-lug full-diameter action as exemplified by the Ruger American and Winchester XPR, to name just two of a growing family of turnbolts sharing the same basic design characteristic.

I believe it was me who coined the term “fat bolt” in an article I wrote nearly 50 years ago describing the Weatherby Mark V Magnum, for it was Weatherby who, in 1957, introduced the concept. In a nutshell, the defining characteristic of the fat-bolt tri-lug action is a bolt body that’s large enough in diameter that the three (or multiples of three) locking lugs oriented on 120-degree centers can be formed by removing metal at the head of the bolt.

In other words, the locking lugs do not protrude beyond the outside diameter of the bolt body behind. There can be three rows of three, as in the case of the nine-lug Weatherby, two rows of three, as in the case of the six-lug Sauer 202 and Roessler Titan 6, or just a single row of three lugs as employed by the Ruger American and Winchester XPR. In every case, the lugs are of less depth than on a twin-lug action, but the shear surfaces are greater.

In addition to the five rifles already mentioned — the Browning A-Bolt III, Thompson/Center’s Venture and Dimension, the German Sauer 100 and Steyr SM-12, the Austrian Roessler Titan 3 and 6, and the Australian Lithgow — all comprise the 13-member fat-bolt tri-lug family. And I may have missed a few.

Having no protruding locking lugs for which raceways must be broached or otherwise machined into the inner walls of the receiver, only a round hole is needed to accommodate the bolt. Inherent, however, in all fat-bolt actions is that the bolt stop/release also serves as the bolt guide by engaging a lengthwise slot on the left side of the bolt body.

Without this arrangement, if the bolt stop is disengaged and the bolt out of battery, it would be free to rotate 360 degrees if it were not for the bolt handle hitting either side of the stock. It’s an academic point but one that one must be aware of.

The basic difference between a fat-bolt tri-lug and a Mauser-type twin lug action can be seen here in this pic of a T-C Venture bolt and that of a Remington 700.

Machining Efficiency
Well, for one thing, bolt thrust or axial forces are more evenly distributed to three points than two; it better ensures a bolt face that’s square with the barrel bore. Also, there’s less machining of the components required, so the tolerances between the bolt and its raceway within the receiver can be much closer than for a twin-lug action with protruding locking lugs. This translates into smoother bolt glide and less lateral play in the bolt when fully withdrawn against the bolt stop.

All tri-lug actions have shorter bolt rotations which leaves more clearance between the bolt handle and the ocular bell of a scope. They’re faster to cycle, too.

Quick Operation
All tri-lug actions require only 60 or so degrees of bolt rotation (handle lift), as opposed to a twin-lug action which requires 90, so another advantage of falt-bolt rifles is that they are faster to cycle for a follow-up shot, and there’s more clearance for the hand as it slides past the scope’s ocular bell.

The Ruger American series of rifles is one of the most affordable out there right now — mostly due to its three-lug design and injection-molded stock. Photo by Eric Conn.

Minimized Price Tag
Bottom line: When mated to inexpensive injection-molded stocks, the typical fat-bolt rifle like the Ruger American and Winchester XPR can be produced for far less than their pricier siblings, the Hawkeye and the Model 70, respectively.

How much less? Consider: The Ruger M77 Hawkeye Standard rifle has an MSRP of $979, while the American goes for $489! The Model 70 Sporter commands $1,049, while the XPR can be had for $549! I use Ruger and Winchester here as examples because they are the most typical and familiar manifestations of the fat-bolt genre in the American marketplace, but in all other cases the same price disparity exists if a given rifle maker has two distinct lines.

The economy of production makes the new generation of fat bolt rifles far more affordable without compromising performance. Indeed, this Ruger American in 6mm Creedmoor delivered these groups for Sundra using Hornady factory ammo.

Affordable Accuracy
But there’s an even better aspect than the affordability of these guns, and it’s that they’re easily as accurate as their more expensive siblings, and in my experience having tested dozens of them, even more so. The only compromises are those of aesthetics. The degree of machining and polish on these $500 guns is a mite less than on rifles costing twice as much, but the growing number of owners obviously could not care less. Ditto for the injection-molded stock, which can be just as elegant of line and dimension as the most classic masterpiece handcrafted in French walnut.

The current Remington Model 700 SPS is a perfect example. Replace the existing rubberized grip panels with a classic checkering pattern (molded of course), and you have a stock that visually can rival that of any custom stockmaker. The only compromise is a tactile one: These stocks do lack the warmth and solid feel of real wood, but again, it’s a compromise value-conscious owners are more than willing to accept.

The Ruger American’s “Power Bedding” system is unique, providing consistent bedding that better maintains zero, yet is less expensive to produce.

Impeccable Bedding Consistency
One advantage the injection-molded stock brings to the table is one of bedding consistency. Every stock is exactly like every other dimensionally, and in high-volume production, manufacturing tolerances can be held at much higher standards than with wood. Whatever bedding dynamic a manufacturer chooses to employ — pillar, partial or full barrel float, tip pressure, V-block … whatever — every stock is exactly the same.

One of the most innovative bedding systems is found in the Ruger American, where two massive steel V-Blocks are embedded into the stock fore and aft of the magazine mortise to cradle and center the receiver. What’s more, these V-blocks engage grooves milled into the underside of the receiver to double as recoil shoulders. It’s a system that guarantees a perfectly consistent bedding dynamic.

As to how well this system works, I recently tested a Ruger American Predator chambered in the new 6mm Creedmoor that, with factory ammunition, proved to be one of the most accurate sporter-weight rifles I’ve ever tested. Three-shot 100-yard groups with Hornady’s 108-grain ELD Match ammo were incredibly consistent, ranging from .52 to .66 inch, with a five-group average of .59 inch!

More simple variations of the Ruger’s “Power Bedding” as they call it, can be found in T/C’s Venture, the Finnish Tikka and Winchester’s XPR. All employ a steel plate embedded in the stock to mate with a groove on the underside of the receiver ring. It does the job of transferring recoil forces to the stock as well as any other system, and it’s far easier to produce than having a separate washer-type recoil plate a la Remington 700 and the like, or a receiver with an integral lug like on the Winchester Model 70.

Unitized polycarbonate magazines like this Ruger rotary reflects the new technology that is gradually replacing both blind and fixed box types.

Magazine Evolution
Another trend we’re seeing is the ascendency of the detachable magazine over the traditional fixed box with hinged floorplate. What has evolved is the virtual one-piece polycarbonate magazine which weighs less than half of a sheet metal version; it can’t rust, it’s virtually indestructible, it has integral feed lips which can’t be bent, and a natural lubricity that makes cartridge feeding incredibly smooth and effortless. Tri-lug rifles have no monopoly on this trend, as there are many excellent examples out there, tri-lugs or otherwise.

The perennial gripes against a detachable magazine is that they can be lost, or due to heavy recoil, release and drop out of a rifle at the most inopportune time — like when you’re being charged by a wounded Cape buffalo! Over the course of my 50 years as a gun writer, I’ve encountered only one big-bore rifle whose floorplate opened during testing.

Today’s detachable magazines are designed so that inadvertent release is virtually impossible. And for sheer convenience, a detachable magazine makes it so much faster and convenient to empty. I swear that with a hinged floorplate, at least one cartridge will likely fall to the ground every time you try to empty the box with one hand. And with a blind magazine, each cartridge must be partially cycled to unload, which is a real pain when you’re hunting out of a vehicle and where the law requires the chamber and magazine be vacant.

A Lot More, For Far Less
As I see it, there’s no question but that there’s a new wind blowing across the sporting rifle landscape — a wind that brings better, more advanced designs, a higher level of accuracy, and at prices within reach of more hunters and shooters than ever before.
How can that be bad?

Editor's Note: This article is an excerpt from the Winter 2017 issue of Gun Digest the Magazine.

NEXT STEP: Download Your Free Storm Tactical Printable Target Pack

62 Printable MOA Targets with DOT Drills - Rifle Range in YARDS This impressive target pack from our friends at Storm Tactical contains 62 printable targets for rifle and handgun range use. Target grids and bullseye sizes are in MOA. Ideal for long-range shooting! Get Free Targets

Exit mobile version